详情
Slag
Dryer can dry mixed mortar, yellow sand, cement plant slag, clay,
coal gangue, mixture, fly ash, gypsum, iron powder and other raw
materials for drying, and is widely used in building materials,
chemical industry, foundry and other industries.
1.
Equipment investment is 1/6 of foreign imported products, made of
alloy steel plate, **4 times more wear-resistant than ordinary
steel plate.
Two.
The thermal efficiency is up to *0% (the thermal efficiency of the
traditional single cylinder dryer is only *2%) and the thermal
efficiency is increased by *8%.
Three,
the initial moisture content of the material is *5%, the final
moisture is less than 0.**1%, and it is the first choice for the
slag powder and dry mixed mortar production line of the cement
plant.
Four,
the fuel can adapt to coal gangue and anthracite, bituminous coal,
oil and gas, can bake below ****0mm block, granular and powdery
materials,
Five.
Less than *0% of the land occupied by a single cylinder dryer and
about *0% of the investment in civil construction.
Six,
no air leakage phenomenon, completely solved the sealing
difficulty, can be installed within 2 hours.
Seven,
the temperature of the outer cylinder is *0 degrees, the
temperature of the exhaust gas is <**0 degrees, and the
application time of the dust removal equipment is more than 2
times, and the water vapor is all out.
Eight,
the output temperature <*0 degree, can directly feed storage,
without the cooling shed cooling.
Nine.
The coal consumption is the 1/3 of the single tube dryer, and the
power saving is *0%. Tons of standard coal consumption of <9 kg,
small type drying machine for the annual coal *****0 yuan, a large
number of annual coal drying machine ******0 yuan.
Ten,
the final water index can be easily controlled according to the
requirements of the user.
