Antminer Z9

1. Estimated specifications and other information of the Antminer Z9 are as mentioned below.

    Hashing algorithm: Equihash

    Power consumption: ***0W± *0%

    Hashrate: *0.8k Sol/s ± 5%

   These are the conservative estimates. We expect the miners to deliver higher performance and efficiency when they are ready to ship.

2. You will need an ATX PSU with sufficient 7 six-pin PCIE connectors. All PCIE connectors on a hashing board need to be connected to the PSU for the hashing board to operate.  Bitmain recommends the APW7 to power the Antminer Z9.

3. The power cord is not included, please find one with at least *0A from your local market.

Separate power supply to control board: there is one additional 6 pin PCIE connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 6 pin PCIE connectors are connected to power supply.