Replacement Dukane 41S30 20Khz Ultrasonic Converter for Welding Machin

详情

Description:

This *0 KHz Ultrasonic Dukane *1S*0 Converter uses the same piezo driver assembly as *******2 standard heavy duty transducer but has a sealed housing and a *4" cord terminating in a mil-spec connector to facilitate use in harsh environments or where the equipment must be hosed down for cleaning. The housing has fittings for 1/4" OD poly tubing to carry dry cooling air to and from the driver assembly. Can not be mounted in a standard Dukane press. Requires the use of **********0 ultrasound cable. Output thread is 1/***0.

Specifications:

Common Questions about ultrasonic transducers:

1. The ultrasonic vibrator is damp. You can check the plug connected to the transducer with a megger. Check the insulation resistance value to judge the basic situation. Generally, the insulation resistance is greater than 5 megohms. If the insulation resistance value is not reached, the transducer is generally damp. The whole transducer (excluding the sprayed plastic case) can be placed in the oven for about 3 hours at **0 °C or used to remove moisture to the resistance value. Normal until now.

2, the transducer vibrator is fired, the ceramic material is broken, and it can be combined with the naked eye and the megohmmeter. Generally, as an emergency treatment measure, the individual damaged vibrator can be disconnected without affecting the normal use of other vibrators.

3, vibrator degumming, our transducer is made of cement, screw fastening double guarantee process, under normal circumstances.

4, stainless steel vibrating surface perforation, the general transducer can be used for *0 years at full load, the vibrating surface perforation may occur.