离岸价格
获取最新报价|
Minimum Order
位置:
-
最小订单价格:
-
最小订单:
-
包装细节:
-
交货时间:
15 days after 30% TT payment or receiving L/C copy
供应能力:
-
付款方式:
T/T, L/C
联系人 Linjian Jin
Fuzhou, Fujian
Description for anodized aluminum sheet
Anodized Aluminum are anodized to increase corrosion resistance and to allow dyeing (coloring), improved lubrication, or improved adhesion. However, anodizing does not increase the strength of the aluminium object.The anodic layer is non-conductive.
When exposed to air at room temperature, or any other gas containing oxygen, pure aluminium self-passivates by forming a surface layer of amorphous aluminium oxide 2 to 3 nm thick,which provides very effective protection against corrosion. Aluminium alloys typically form a thicker oxide layer, 5-15 nm thick, but tend to be more susceptible to corrosion. Aluminium alloy parts are anodized to greatly increase the thickness of this layer for corrosion resistance. The corrosion resistance of aluminium alloys is significantly decreased by certain alloying elements or impurities: copper, iron, and silicon,so 2000, 4000, and 6000-series Al alloys tend to be most susceptible.
Although anodizing produces a very regular and uniform coating, microscopic fissures in the coating can lead to corrosion. Further, the coating is susceptible to chemical dissolution in the presence of high and low pH chemistry, which results in stripping the coating and corrosion of the substrate. To combat this, various techniques have been developed either to reduce the number of fissures or to insert more chemically stable compounds into the oxide, or both. For instance, sulfuric anodized articles are normally sealed, either through hydro-thermal sealing or precipitating sealing, to reduce porosity and interstitial pathways that allow for corrosive ion exchange between the surface and the substrate. Precipitating seals enhance chemical stability but are less effective in eliminating ion exchange pathways. Most recently, new techniques to partially convert the amorphous oxide coating into more stable micro-crystalline compounds have been developed that have shown significant improvement based on shorter bond lengths.
Some aluminium aircraft parts, architectural materials, and consumer products are anodized. Anodized aluminium can be found on mp3 players, smartphones, multi-tools, flashlights, cookware, cameras, sporting goods, window frames, roofs, in electrolytic capacitors, and on many other products both for corrosion resistance and the ability to retain dye. Although anodizing only has moderate wear resistance, the deeper pores can better retain a lubricating film than a smooth surface would.
Anodized coatings have a much lower thermal conductivity and coefficient of linear expansion than aluminium. As a result, the coating will crack from thermal stress if exposed to temperatures above 80 °C. The coating can crack, but it will not peel.The melting point of aluminium oxide is 2050 °C, much higher than pure aluminium\'s 658 °C.This and the non-conductivity of aluminum oxide can make welding more difficult.
In typical commercial aluminium anodization processes, the aluminium oxide is grown down into the surface and out from the surface by equal amounts.So anodizing will increase the part dimensions on each surface by half the oxide thickness. For example, a coating that is 2 μm thick will increase the part dimensions by 1 μm per surface. If the part is anodized on all sides, then all linear dimensions will increase by the oxide thickness. Anodized aluminium surfaces are harder than aluminium but have low to moderate wear resistance, although this can be improved with thickness and sealing.
Anodized Aluminum Plate
| AlloyNo. | Thickness(mm) | Width(mm) | Length(mm) | Temper | |
| A1050,A1060,A1070,A1100,A1235，A1145,A1200etc. | 0.2-100 | 20-2300 | 20-8000 |
O,H12,H22,H14,H16 ,H18,H24,H26,etc |
|
| A2017A2024A2014etc. | 0.2-100 | 20-2300 | 20-8000 | O,T3,T4,T6T42,F | |
| A3003,A3105,A3004etc. | 0.2-100 | 20-2300 | 20-8000 | O,H14,H18,H24,etc | |
|
A5052,A5005,A5083, A5754,A5086etc. |
0.2-100 | 20-2300 | 20-8000 |
O,H18,H24,H32,H34 ,H111,H112,etc |
|
| A6061,A6082,A6063 | 0.2-200 | 20-2300 | 20-8000 | T4,T6,T651,etc | |
| A7075 | 0.2-200 | 20-2300 | 20-8000 | O,T6,F | |
| A8011,A8006,A8079 | 0.2-100 | 20-2300 | 20-8000 |
O,H12,H22,H14,H16 ,H18,H24,H26,etc |
|
|
Packing : Export wooden pallets. The bundle wegiht not exceed 2MT. Loading:by 1x20GP, 1X20GP can load about 20MT |
|||||
| Standards:ASTM-B209.EN573-1,GB/T3880.1-2006 | |||||
|
Quality of material: totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set. |
|||||
| MOQ | 2.5-5tons | ||||
| Paymentterm： | TT,L/C | ||||
| DeliveryTime | 15daysafter30%TTpaymentorreceivingL/Ccopy | ||||
|
Kind attention : Specifications can be customized as the customers requirements. |
|||||
Application for Printing in Anodized Aluminum Sheet
| Application |
1) Home Lighting Lighting Network |
|||||
|
2)Solar reflective pieces; |
||||||
|
3)architectural appearance |
||||||
|
4)Indoor decoration: ceiling, metope, etc |
||||||
| 5)drying cabinet; | ||||||
| 6)elevator; | ||||||
| 7)scutcheon, luggage etc; | ||||||
| 8)The car inside and outside decoration; | ||||||
| 9) Indoor decorations, such as picture frames; | ||||||
| 10) Household appliances: refrigerators microwave audio equipment, etc | ||||||
|
11)Aerospace and military aspects, such as China\'s large aircraft manufacturing, the shenzhou spacecraft series, satellites, etc |
||||||
| 2)Precision Parts Processing; | ||||||
| 13)mould making; | ||||||
| 14)Chemical/thermal insulation pipe coating | ||||||
| 15) Kitchen decoration etc | ||||||
Packaging and shipment for anodized aluminum sheet
:
Service:
The Lingfeng team is ready to assist with any product needs or enquiries. We value our customers and welcome your thoughts and feedback.
Please send comments, questions and requests through alibaba or our personal contact so they can be directed to the appropriate department.
About samples: Based on our company rules, a few samples are willing to be offered, but clients are requested to pay freight.
Working time:9:00~17:30(GM+8) from Monday to Friday, but you also can contact with us via personal contact information during our leisure time. We will try our best to offer you service in 24*7 hours.
Any quality, quantity problems are occured, response you will get in time not over more 24 hours after we recieve your complains. Problems will be solved in one week throught friendly negotiation.
