Product
Name:MedicalProtectiveEyeMask;Goggles;Protective Glasses; Structure composition: the product
is composed of protective cover, lens and fixing device (elastic
band) made of high polymer material. Non sterile,
disposable； Product
performance: 1. Appearance and structure: the
surface of the protective cover shall be smooth, burr free, sharp
angle free, colorless and transparent, and the wearing shall not
cause discomfort to the eyes and faces; the surface of the lens
shall be flat, smooth, scratch free, ripple free, bubble, impurity
or other obvious defects that may damage the vision; the adjustable
parts or structural components shall be easy to adjust or replace,
and the elastic band shall have good elasticity. 2. Specification: eye mask size: length
**6.4mm, width *4mm, width *5mm, error no more than ± *0%; elastic
band length no less than **0mm, width no more than *0mm, elastic
band elongation no less than *0%. 3. Falling resistance: the eye mask
falls freely on the hard surface from 1m high with three different
starting positions, the structural parts shall not fall off, the
appearance of the eye mask shall not be damaged, and the lens shall
not have cracks. 4. Heat resistance: the eye mask shall
not deform after being kept in water at *7 ℃± 2 ℃ for
3min. Usage method:Open the package, take
out the medical isolation eye mask; open the elastic belt to the
size of the head, and put the product on it; adjust the protective
cover and elastic belt to make it fully fit in the eye
position. Storage requirements: store in a
dry, well ventilated and clean warehouse with relative humidity no
more than *0% and no corrosive gas. Scope of application: it is used in
medical institutions to prevent splashing of liquid, blood or
splashing.
