STP-550 semiautomatic stencil print is great for studio and small-batch production

详情

STP系列：錫膏印刷機 Stencil Printer
專用於SMT錫膏鋼版、網版印刷。適用精密細小腳距。 採用無工具更換，不同規格變更快速又容易。双面板印刷可以快速更換完成，且非常精密。設定及清除快速。X、Y軸和角度可以調整。
Special for SMT stencil and screen printing. Available for precision, fine pitch and double side printing. Quick set up and remove. X /Y axis and angle are adjustable. Fast change different boards without tools. Double side printing can be completed and changed quickly and precisely.

STP***0 半自動錫膏印刷機 Semiautomatic Stencil Printer
適合框架Suitable Frame：*2" x *2" to  *4〞× *4〞(3*0 mm x **0 mm to **0 × **0mm) 鋼板框上須鑽孔
印刷範圍Printing Area：*4〞× *7〞(**6 × **0mm)   再小範圍可以客製
PCB板厚度 PCB thickness：必須大於 >0.8mm。常見1.0/1.2/1.6mm
重覆誤差Repeatability：0.**8mm
機台淨重Net Weight：*0 kgs
刮刀長度Length of Squeegee：9 (**8mm)
機台尺寸Dimension：**0 × **0 × **0mm
選購刮刀Optional Squeegee: *2, *4, *6, *7

• STP***0：有彈性的、半自動表面黏著錫膏印刷機。包括自動印刷機所應有的功能，特別適合研發、樣品試作及少量多樣的生產使用。 專為無鉛錫膏及新式電子零件印刷設計。
• 刮刀裝置：支架有雙氣缸控制鋼刮刀片，保持固定壓力和角度，手握把推向左側，右刮刀即下降刮板印刷。當反向拉回則右刮刀會上升；左刮刀下降，作第二次印刷。 由左到右印刷，確保印刷錫面均勻、錫膏後度穩定。可印刷單面或双面PC板
• 底座升降裝置：當印刷完成，推動黃色旋鈕桿，底座機構即平順垂直下降。確保網版與PC板分離時，不會有錫膏沾黏現象，保持板面清潔。適合微小腳距電路印刷。
• 對位裝置：精密X、Y軸調整機構可自由作對位調整。
• 開啟裝置：按鈕式操作，由氣缸自動控制結構穩定的印刷框架開合。
• 免用工具、直覺式調整双面PC板固定座，可調式向下壓力閥。

STP***0 provides consistent stencil height and pressure throughout the print stroke.
Separate the stencil from the PCB with a true vertical mo.
Vertical separation is an essential process parameter for ultra-fine pitch solder paste printing.
This ergonomically unique design features side-to-side squeegee motion for single or double-sided boards.
Lower cost, bench top equipment is for the volume that doesn't warrant these costlier systems.
 

• Vertical separation of stencil from PCB for high-reliability, ultra-fine-pitch printing.
• Dual squeegees with independent pressure controls for bi-directional printing.
• Squeegee holders mounted to linear slides maintain consistent height and pressure throughout print stroke.
• Ergonomic design with unique side-to-side squeegee motion for maximum operator ease.
• Large work area for PCBs up to **6 mm x **0 mm (*4" x *7")
• Accepts stencil frames up to **0 mm x **0 mm (*4" x *4")
• Highly precise, heavy-duty design weighs approximately *5 kgs.
• Pneumatically controlled raising and lowering for the printing frame loading/unloading.
• Universal PCB holders and supports for single or double-sided boards.
• Metal and rubber squeegees are included.