Sawn Timber / Poplar Lumber

详情

Poplar is one of the less expensive hardwoods. Its also fairly soft (1 in hardness on a scale of 1 to 5), which makes it easy to work with. Poplar is white with some green or brown streaks in the heartwood. Because poplar is not the most beautiful wood, its rarely used in fine furniture, and if it is, its almost always painted. Poplar can be a good choice for drawers (where it wont be seen) because it is stable and inexpensive. You can find poplar at larger home centers, but a lumberyard will have a better selection.

Poplar is a utility wood in nearly every sense. Its used for pallets, crates, upholstered furniture frames, paper (pulpwood), and plywood. Poplar veneer is also used for a variety of applications: either dyed in various colors, or on hidden undersides of veneered panels to counteract the pull of the glue on an exposed side that has been veneered with another, more decorative wood species.

Very easy to work in almost all regards, one of Poplars only downsides is its softness. Due to its low density, Poplar can sometimes leave fuzzy surfaces and edges: especially during shaping or sanding. Sanding to finer grits of sandpaper may be necessary to obtain a smooth surface.

Description

Available width **0m***0mm

Available lengths Up to ***0mm

Available moisture percentage ***2% and *2% **8%

Humidity Klin Dried and Fresh cut

Quantity (each month) MIN: *0m3; MAX****0m3

Type: Edge and UN-edged

Finishing Rough Sawn, S2S,S3S,S4S, Smooth

Grade          AA AB BB ABC

Species:        Poplar, Tulip Poplar, Yellow Poplar

Specification  : Hard wood

Usage Furniture, flooring etc