Un-plasticized Poly Vinyl Chloride (uPVC) roofing sheets

详情

UPVC Sheets
Our UPVC sheet is a modern rigid three-layer Un-plasticized Poly Vinyl Chloride (uPVC) roofing sheet. The advanced technology of manufacturing ensures superior quality and performance of the roofing product. uPVC sheets are having properties like heat insulation, sound insulation, water resistance, chemical, and alkali resistance, corrosion-proof, fire retardant, eco-friendly, easy to install and move, lightweight as well as cost-effective in installation. As per the efficiency and benefits it provides. BANSAL uPVC sheets have an attractive design and appearance, possess a wide range of advantageous properties, and have an affordable price. BANSAL uPVC Sheet is an optimum choice for roofing, wall & cladding in civil and industrial construction. It can be used in many applications both exterior and interior i.e. Factory buildings, Warehouses, Market, Vehicle Parking sheds, Farm Houses, Resorts, Cottages, Chemical Industries, Animal Houses, Construction Houses, Schools, Colleges, Hotels, etc.
 

INSTALLATION GUIDELINE:

 uPVC Roofing Sheets are applicable to roof pitches 6 degrees to *2 degrees, with a purlin span no more than ***0mm. ****-T roof sheets are applicable to roof pitches from *8 degrees to *2 degrees, with a purlin span no more than **0mm. 
The thermal insulating material cannot be used directly under the sheet.
Installation: Please dont stand between two purlins during installation. For a gabled roof, sheets on each side should be installed at the same time as the ridge tile. Installation is not recommended to be carried out at a temperature below *5 degrees Celsius. Install be professional roofers to ensure the quality of installation.
Horizontal overlap by one wave and vertical overlap no less than **0mm.
The roofing sheets can be fixed by supplied hooks or self-tapping screws. For every sheet, two sets of hooks should be fixed properly on one purlin, passing through the wave crest. Every wave crest at vertical overlapping area should be fixed to the purlin by hooks, and a reinforcing method should be taken in areas with heavy wind.
Roofing sheets should be cut by the toothless thaw.
Drilling Holes: Please make sure that the sheets have been put correctly on purlins before drilling holes. The hole diameter should be 2mm wider than that of the hook mandrel. Please use PVC glue to seal for miss-drilled holes.
Storage & Handling: The sheets should be stored on a plane stably, which should be longer than the sheet. Shorter sheets should be put on longer sheets to avoid deformation. Dont stack different profiles of sheets together. Avoid breaking, rubbing, or scratching the surface during handling.
For safety, before installation, check whether the purlins are stable and firm. Roofing sheets should be stacked along the direction of the slope, and no more than 3 pieces per pile. Dont put any roofing material on unstable purlins to avoid sliding off the roof. Stop installation in the weather of rain, frost, and strong winds.
 
APPLICATION
Our uPVC sheet is best installed on industrial buildings, agricultural buildings, factories, warehouses, mobile homes, manufactured home construction, steel structures, shopping malls, etc.