离岸价格
获取最新报价90000 ~ 120000 / Set ( Negotiable )
|Minimum Order
位置:
-
最小订单价格:
最小订单:
-
包装细节:
-
交货时间:
shanghai, China
供应能力:
-
付款方式:
-
联系人 Ms. sally
Nantong, Jiangsu
| Item | Unit | CK****0E | CK****5E | CK****0E | CK****0E | |||
| Capacities | ||||||||
| Swing over bed | mm | ***0 | ***0 | ***0 | ***0 | |||
| Swing over carriage | mm | **0 | **0 | ***0 | ***0 | |||
| Distance between two centers | mm |
***0/***0/***0/***0/***0/***0/***0/ ****0/****0 |
||||||
| Max. turning length | mm |
***0/***0/***0/***0/***0/***0/***0/ ***0/****0 |
||||||
| Span of guideway | mm | **5 | ||||||
| Maximum load bearing between two centers (plus 0.5T when add a steady rest) |
T |
6T |
||||||
| Spindle | ||||||||
| Spindle bore | mm | **0 | ||||||
| Taper hole of spindle | **0 | |||||||
| Spindle center taper | Morse 6 | |||||||
| Spindle front nose | A***5（1:4；φ**5.**5mm） | |||||||
| No. of spindle speeds (Four gearshift, infinitely variable speed) | r/min | 3.*5～**5 | ||||||
| Turret | ||||||||
| Tool hoder specification dimensions | mm | **0×**0 | ||||||
| Section of tool shank | mm | *0×*0 | ||||||
| Max. travel of X-axis | mm | **0 | **0 | **0 | **0 | |||
| Turret working position | 4 | |||||||
| Max. cutting force Pz | N | ****0 | ||||||
| Max. feed of Z-axis(P x) | N | ****0 | ||||||
| Max. feed of X-axis(P x) | N | ***7 | ||||||
| X/Z rapid speed | m/min | 3/5 | ||||||
| Tailstock | ||||||||
| Dia of tailstock sleeve | mm | **0 | ||||||
| Travel of tailstock sleeve | mm | **0 | ||||||
| Taperhole of tailstock | Morse6 | |||||||
| Rapid speed of tailstock | m/min | 2.1 | ||||||
| Hydraulic lubrication | ||||||||
| Automatic lubricator | AMO-Ⅲ***0S | |||||||
| Gear pump model | P**4RP*1GT | |||||||
| Rated pressure of gear pump | MPa | 2.*4（*5kgf/cm2） | ||||||
| Gear pump flow | L/min | 6 | ||||||
| Motor model of gear pump | 1/2P4H**3＋P1 | |||||||
| Cylinder working pressure | MPa | 0.*8～1.**6（*0～*2kgf/cm2） | ||||||
| Cooling system | ||||||||
| Cooling pump type | LXB***0 | |||||||
| Cooling pump motor power | W | **0 | ||||||
| Cooling pump flow | L/min | **0 | ||||||
| Power system | ||||||||
| Main motor model | CTB****0ZRD****0MGP | |||||||
| Main motor power | Kw | *0 | ||||||
| Rated speed of main motor | r/min | ***0r/min | ||||||
| Servo motor torque of x-axis | N.m | FANUC *2 | ||||||
| Servo motor speed of x-axis | r/min | FANUC ***0 | ||||||
| Servo motor torque of z-axis | N.m | FANUC *0/*0 | ||||||
| Servo motor speed of z-axis | r/min | FANUC ***0 | ||||||
| Tool holder motor power | W | **0 (Four position) | ||||||
| Tool holder motor speed | r/min | ***0 | ||||||
| Specification for main drive triangle belt | C***0 | C***3 | C***0 | C***0 | ||||
| No. of main drive triangle belt | 5 | |||||||
| Attachments | ||||||||
| Four jaws chuck | mm | Φ***0mm | ||||||
| General tools for operation and maintenance | suit | 1 | ||||||
| Overall dimensions & weight | ||||||||
| Length | mm | ***0/***0/***0/***0/***0/***0 (length less than and equal to ***0mm) | ||||||
| Width | mm | ***0 | ***0 | ***0 | ***0 | |||
| Height | mm | ***0 |
***0 |
|||||
