详情
Working principle:
1.direct heating, sterilization, cooling;
2.hot water tank before heating, to reach the process set
temperature;
3.the product into the sterilization kettle, close the kettle
door;
4. Open the balance device, and the process water in the hot water
tank is pumped to the sterilization kettle through the pump to
reach the process set level;
5. Use the circulating pump to circulate the sterilization process
water in the kettle. The steam is injected through the water vapor
mixer and heated up to the sterilization temperature set by the
process.
6. Enter the sterilization stage, the circulating pump is always in
the open state, when the temperature fluctuates, the steam volume
is controlled by the automatic valve switch to achieve temperature
stability control;
7.after the sterilization stage, stop injecting steam into the
kettle;
8. sterilization process water pumped back to the hot water tank
through the pump, storage for the next sterilization use, close the
balance device;
9. Inject cooling water into the sterilizing kettle through the
cold water pump to realize the cooling of the products in the
kettle.
