详情
The rotary encoder is an electromechanical device that can convert
the angular motion of the shaft into a pulse signal with a phase
deviation of *0 ° between A and B phases, where C is the reference
ground for A/B signals
1. The positive and reverse directions can be obtained according to
the phase relationship of A/B signals.
2. The number of rotating steps can be obtained by counting the
pulses.
3. The angular velocity can be obtained according to the counting
of pulse in unit time.
In addition, the axis of the rotary encoder can not only rotate
horizontally, but also move up and down to realize the function of
keys
Applications：
Home / Audio / TV / Automotive / Energy / Industrial
Product parameter
description
**************************************************************-
Control part orientation：Vertical/Horizontal(Optional)
Actuator configuration：Flat/Serrated (Optional)
Number of detent ：*0
Number of pulses (Positions)：*5
Pulse direction ：Positive direction
Detent torque：*****0gf.cm
Push-on switch ：with/without (Optional)
Travel of push-on switch：0.5mm
Ratings :*0mA DC 5V
Rotating life:*0,**0 cycles
Push switch life:*0,**0 times
Actuator
configuration
Half round D-shaped handle(Flat)/Plum shaped handle(Serrated)
Actuator length
Total length:
L=*0 D=5 F=4
L=*5 D=7 F=7
L=*0 D=7 F=*0
Output
Specifications
Output : Incremental (Two phase A and B)
Number of detent :*0/*0 (Optional)
Number of pulse(Positions) :*5/*0 (Optional)
