Socket Tester Digital Display Socket Detector Portable Circuit Polarity voltageTester wall Plug

详情

Safety instruction

A Warning

To avoid possible electric shock or personal injury:

• Please check the testercarefully before using it and confirm if there is any damage. If there is any damage, please stop using it immediately and send it to repair.

1. Check whether the tester is correct. Insert the tester into a known correct socket for testing and check that the test function is correct before using it.
2. The RCD test must be properly operated under the correct wiring.
3. When testing RCD, please close the equipment on the power line to ensure that power failure does not cause any harm. When testing in public places, it must be permitted to test.
4. When using the tester to detect the wrong wiring of the socket, please find professional electrician maintenance wiring.

Technical specifications

1. operating voltage: *8~**0V/*5~*5Hz
2. Measure voltage (with LCD):

*8~**0V/*5~*5Hz

accuracy: ± (2.0%*2)

1. operating temperature:

0°C~*0°C

1. operating Humidity:

*0%~*5%RH

1. Storage temperature:

**0°C~*0°C

1. Storage Humidity:

*0%~*0%RH

1. Altitude: M***0m
2. RCD test: >*0mA
3. RCD working voltage:

**0V±*0V

1. GFCI test: >5mA
2. GFCI working voltage:

**0V±*0V

Note: RCD and GFCI functions do not coexist

Operation description

Socket tester

Insert the tester into the standard three hole power socket, then observe the indicator light and the function table, judge whether the socket connection is correct, and then pull out the tester. When the wrong connection is detected, please find a professional electrician to repair the wiring.

Note:

1. the test time is not more than 5 minutes
2. When using, please be

careful not to touch the RCD button, so as not to trigger the leakage protection switch, causing

unnecessary losses.

Voltage test (with LCD)

Insert the tester into a standard three hole power outlet. Read the socket voltage value from the tester screen, the unit is V.

Note:

1. the test time is not more than 5 minutes
2. When using, please be

careful not to touch the RCD button, so as not to trigger the leakage protection switch, causing

unnecessary losses.

RCD (or GFCI) Test

Insert the tester into the correctly connected three hole power socket, press the button
Socket tester is mainly used for power socket wiring detection and RCD test. It can detect the wiring status of the socket quickly and accurately. With LCD, it can also measure the voltage of the socket and display it.

A Warning

Please read the instruction manual carefully before use and strictly observe the safety rules and the caution, attention and warnings listed in the instruction manual.

Safety instruction

A Warning

To avoid possible electric shock or personal injury：

• Please check the testercarefully before using it and confirm if there is any damage. If there is any damage, please stop using it immediately and send it to repair.

1. Check whether the tester is correct. Insert the tester into a known correct socket for testing and check that the test function is correct before using it.
2. The RCD test must be properly operated under the correct wiring.
3. When testing RCD, please close the equipment on the power line to ensure that power failure does not cause any harm. When testing in public places, it must be permitted to test.
4. When using the tester to detect the wrong wiring of the socket, please find professional electrician maintenance wiring.