详情
Charging function description：
Charging is available for DC ***1 port *5V/2A charging and TYPE C
port 5V/2A charging, while the DC ***1 port is compatible with
solar DC *8V charging。
When the charger is plugged IN to charge the product, the display
will light up and display "In" flashing. The electric quantity will
be displayed in a digital increasing way along with the product
voltage。
After the battery is fully charged, the display displays **0% and
"IN" does not blink。
When the charger is unplugged, the display will go off in 5
seconds and enter standby mode。
Function description of the wake up/On/Off button：
When the device is in standby mode, click the power button
(within 0.5 seconds). The display screen displays the current power
in percentage (digital display). At the same time, open the USB
output function, DC output function, wireless charging output
function and TYPE-C output function。
Click the power button (within 0.5 seconds) when the device is in
standby mode, and the display screen will display the current
electric quantity (digital display) according to the percentage.
Then long press the key button of the headlamp for 2 seconds, the
lighting headlamp will be on, press the key button of the
headlamp again, the lighting headlamp will flash, press the key
button of the headlamp again, the lighting headlamp SOS will blink,
press the key button of the headlamp again, press the key button of
the headlamp again, and press the key button of the headlamp again.
Turn on the lamp function and press the key button of headlamp
again to turn off the lamp。
Press the power button in standby mode, and the display displays
the current power supply in percentage. Hold down the AC output
power button for 2 seconds, and the **0V and *0Hz displays on the
display. The AC output indicator turns on blue (red if any fault
occurs), and the **0V*0Hz AC output is normal. Long press the AC
output switch button to turn off the AC output, and the **0V and
*0Hz displays are off (the same is true for
**0V*0Hz/**0V*0Hz).。
USB discharge function description：
Press the power button, and the display will display the current
battery by percentage. When charging other products at any USB-A
port, the screen will display "⚡" symbol for 5V/2A ordinary
charging. During output, the electric quantity will be displayed in
a digital decreasing way along with the product voltage. When the
product voltage is lower than *2V, the display displays 1% and
blinks, indicating a low power alarm，
When the voltage is lower than *1V, turn off the output and turn
off the display。
When this product charges electronic equipment, the electric
current is less than **0mA±*0mA, and the output of the product is
closed and entered standby state。
When the USB output is short-circuited, the USB port shuts down
the output. Press the power button again.
TYPE-C Indicates the output function：
When TYPE-C port charges other products, the screen displays "⚡⚡"
symbol. It is a fast charge output, supporting
5V/3.5A,9V/2A,*2V/1.5A. When output, the electric quantity will be
displayed in a digital decreasing way along with the product
voltage.
When the voltage of this product is lower than *2V, the display
displays 1% and blinks, indicating low power alarm.。
When the battery voltage is lower than *1V, turn off the output
and turn off the display。
When TYPE-C charges electronic devices, the electrical current
is less than **0mA±*0mA, and the output of the product is turned
off and entered standby stat。
When the TYPE-C output is short-circuited, the TYPE-C output is
shut down and you need to press the power button again。
