Cheap Copper Scrap/Red Copper Wire Scrap 99.99%

详情

1.SPECIFICATIONS:

NON-LME Electrolytic Copper Cathodes Grade A. Purity (Cu): *9.*9 % Maximum, *9,*7 % Minimum, conforming to the LONDON METAL EXCHANGE (LME) specification (Cathode Grade Designation Cu Cath 1).
 

CHEMICAL COMPOSITION (ON DRY BASIS, PERCENTAGE IN WEIGHT)

Cu *9.*6% - *9.*9% / Rejection below *9.*6%

Sulphur (S/ppm) 4 Cobalt (Co/ppm) 0.2

Iron (Fe/ppm) 2 Arsenic (As/ppm) 0.1

Silver (Ag/ppm) *0 Bismuth (B1/ppm) 0.1

Lead (Pb/ppm) 0.2 Manganese (Mn/ppm) 0.1

Nickel (Ni/ppm) 0.2 Tellurium (Te/ppm) 0.*5

Selenium (Se/ppm) 0.3 Aluminium (Al/ppm) 0.5

Antimony (Sb/ppm) 0.1 Magnesium (Mg/ppm) 0.4

Silica (Si/ppm) 0.3 Zinc Zn/ppm) 0.4

2.MEASUREMENT:

Length, width and thickness of each sheet shall be equivalent to generally accepted LME, internationally accepted measurements. The Copper Cathodes surface condition shall be free of imperfections, defects and excess exposure to outdoor weather.

Dimensions **4 mm x **4 mm x *2 mm (LME Standards) App *6 X*6X0.5

Weight of each sheet **5 Kilograms (Approximately ± 2%)

Net weight of each pallet 2.**0 Kilograms (Approximately ±2%)

Net weight per container *0.0 Metric Tons (Approximately ± 2%)

Gross weight per container *2.2 Metric Tons (Approximately ± 2%)

3. PACKING:

Palletised -Aluminium banded, Bundles of bare, unsoiled, non-oxidized Copper Cathode

plates and banded by aluminium bands suitable for long distance transportation and well protected against scattering, shock and rust. Net weight of each bundle: 2.5MT +/*1%). No wooden packaging allowed.