Manufacturer supplies WX****0 type
stainless steel mixing tank, stainless steel mixer reactorStainless
steel mixing tanks are widely used in industries such as coatings,
medicine, building materials, chemicals, pigments, resins, food,
and scientific research The equipment can be made of carbon steel,
stainless steel, and other materials according to the user\'s
product process requirements, and can be equipped with heating and
cooling to meet different process and production needs. The heating
methods include jacket electric heating and coil heating. The
equipment design is reasonable, with advanced technology,
long-lasting durability and features easy operation and convenient
use. It is an ideal chemical equipment with low investment, quick
production start, and high returns. Types of mixers ①eller mixer:
Consists of **3 propeller blades (Figure 2), operates at high
speed, with the peripheral speed of the blades generally being***5
m/s. The propeller mixer mainly creates axial flow, producing a
large circulation volume. It is suitable for mixing low-viscosity
(＜Pa·s) liquids, emulsions, and suspensions with less than *0%
solid content. The mixer\'s shaft can also be inserted horizontally
diagonally into the tank, creating an asymmetric circulation path,
increasing turbulence, and preventing the liquid surface from
caving in. ② Stainless steel mixing tank mixer:ists of **4 straight
or curved blades mounted on a horizontal disk (Figure 3). The ratio
of the blade\'s outer diameter, width, and is usually *0:5:4, with
a peripheral speed of **8 m/s. The turbine creates highly turbulent
radial flow when rotating, for gas and immiscible liquid dispersion
and liquid-liquid reactions. The viscosity of the liquid being
mixed should not exceed *5Pa·s. ③ P mixer: There are two types,
flat paddle and inclined paddle. The flat paddle mixer consists of
two straight blades. The ratio of the blade diameter to height
is***0, with a peripheral speed of 1.**3 m/s, producing a small
radial liquid flow. The inclined paddle mixer (Figure4) has two
blades angled at *5° or *0°, creating axial flow. The paddle mixer
is simple in structure, often used for low-viscosity liquids,
dissolving and suspending solid particles. ④ Anchor mixer: The
shape of the blade\'s outer edge matches the inner wall of the
mixing (Figure 5), with only a small gap in between. It can remove
viscous reaction products attached to the tank wall or solid matter
accumulated at the bottom maintaining good heat transfer
efficiency. The peripheral speed of the blade is 0.**1.5 m/s,
suitable for mixing Newtonian fluids and pseudlastic fluids with
viscosities up to **0Pa·s. However, when mixing highly viscous
liquids, there may be large stagnant areas in liquid layer. ⑤ Screw
mixer: The outer diameter of the screw is equal to the pitch
(Figure 6), specifically for mixing high-viscosity liquids
(******0Pa·s) and pseudoplastic fluids, typically operating in
laminar flow conditions. ⑥ Magnetic stirrer: Corning digital heater
comes a closed-loop knob to monitor and adjust the stirring speed.
The microprocessor automatically regulates the motor power to adapt
to water, viscous solutions, and semi-solid. ⑦ Magnetic heating
stirrer: Corning digital heating stirrer comes with an optional
external temperature controller (Cat. No. ***5PR), can also monitor
and control the temperature in the container. Heating or cooling
devices These are generally determined by the user based on whether
the material needs to be, dried, or cooled. The temperature should
be below **0℃ within the customized range
