TP********0 **0 pairs MDF terminal block is used on the vertical
side of the MDF, which is used for the termination between external
lines and jumper wires. It adopts the IDC connection methods. It
consists of *0 pieces *-pair modules. Our TP******5 protection
magazine can be inserted into the block, with the function of
protecting personnel and equipments against over voltage.
Modular design and installations
Technical
Parameters
1) Working temperature: **0℃ ~ *0℃
2) Storage temperature: **5℃ ~*5℃
3) Relative humidity: ≤*5%(**0℃)
4) Atmospheric pressure: *0kPa ~**6kPa
5) Appearance: the color of all metal and plastic parts is
uniform, without any scratch, rust, crusting and cracks.
6) The labels are clear, complete and durable.
7) Insulation resistance: under normal ambient conditions,
after high temperature test, low temperature test, temperature
varying test and humidity heat test, the insulation resistance
between any two independent contacts, and/or between contacts
and metal parts ≥ ***0MΩ
8) Contact resistance between contacts: under normal ambient
conditions, the contact resistance between contacts ≤7 mΩ.
After high temperature test, low temperature test, temperature
varying test and humidity heat test, the increasing resistance
≤3 mΩ And after inserting the connection cord (or test
cord) into the module for **0 times, the increasing resistance
≤3 mΩ
9) Contact resistance between conductor and contact: under
normal ambient conditions, the contact resistance between
contacts ≤3 mΩ. After high temperature test, low temperature
test, temperature varying test and humidity heat test, the
increasing resistance ≤2 mΩ. And after terminating for **0
times, the increasing resistance ≤2 mΩ.
*0) Dielectric strength: under normal ambient conditions, after
high temperature test, low temperature test, temperature
varying test and humidity heat test, the insulation resistance
between any two independent contacts, and/or between contacts
and metal parts is able to withstand an AC voltage of ***0V
(virtual value) at *5Hz~*0Hz sinowave for 1 minute, without
spark over and flying arc
*1) Gas tight performance: contact touches the conductor at
both sides, and thus forming the gas tight area, while the area
of gas tight occupies ≥*0% of the touched area on each side.
*2) Conductor diameter range: 0.*2mm*0.6mm, while insulation ≤
1.4mm
*3) Pulling strength:≥*5N while pulling from the vertical side
of the contacts
*4) Flame retardant performance: all plastic parts are flame
retardant, reaching grade of UL FV0
*5) Life circle: ≥**0 times
Order
Data
ITEM NO
|
UNIT
|
DESCRIPTIONS
|
TP********0
|
pcs
|
**0 pairs MDF terminal block, without
protection
|
TP******2TM
|
pcs
|
*-pole test cord, with test plug to 6P2C modular plug
for MDF terminal block #TP********0, 3m
|
TP******2TA
|
pcs
|
*-pole test cord, with test plug to alligator clip
for MDF terminal block #TP********0, 3m
|
TP******4TA
|
pcs
|
*-pole test cord, with test plug to alligator clip
for MDF terminal block #TP********0, 3m
|
TP******1DP
|
pcs
|
1 pair disconnection plug for MDF terminal block #
TP********0
|