10ton hydraulic pultrusion machine

详情

BLGY****0 Hydraulic type pultrusion machine is controlled by PLC, which adopts hydraulic pressure type to-and-fro as traction force with pneumatic length-fixing cutting. The line consists of roving racks, resin bath, mould calibrating table, to-and-fro traction machine, cutting saw, racks for finished products and control system. It is applicable to plutrude profiled products such as bars, pipes, angle bars, U-steel, cable tray with uniform section.

A. Equipment characteristic
Temperature is controlled by high-precision dual displaying meter.
Traction speed digital displaying
Sealing elements of hydraulic cylinder is imported ones and hydraulic system adopts importing variable pump hydraulic components.
With the optional function of oil temperature alarm and oil level malfunction alarm. Optional hydraulic oil heater.
Hydraulic type traction device supply different kinds of operation modes. The traction speed ID infinitely controlled.
Adopting round blade cross cutting, pneumatic clamping and tracing.

B. Technical parameter
1. Roving racks 2sets
Ivory paint, combined structure, easy accessibility
Rolls capacity: *****0/5 layers
Dimension: 2m(L) X 0.6m(W) X 2m(H)
Standard configuration: 2 sets

2. Resin bath 1set
Number: 1 set
Body dimension: ***0mm X **0mmx**0mm
Resin capacity: About *0kg
Support frame dimension: ***0mmx **0mmx**0mm

3. Calibrating table 1set
Fixed plate of calibrating mould: ***0X**0mm
Temperature control zone: 4 (The max. Power can be controlled: *7Kw)
Dimension: ***0X***0X***0mm

4. Traction device 1set
Motor power of the hydraulic station: 2× 3Kw
Working table(width X height): **0× **0mm
Max. Traction force of the machinery: (max*6Mpa): ****0kg
Max. Press force: ****0kg
Traction speed: 0.**1m/min
Journey of the haul off oil cylinder: **0mm
Press journey: **0mm
Water supply: Circular cooling water, pressure≥ 1.5bar
Dimension: ***0mm× ***0mm× ***0mm