离岸价格
获取最新报价|
1 Set Minimum Order
国家:
China
型号:
MG-26
离岸价格:
位置:
-
最小订单价格:
-
最小订单:
1 Set
包装细节:
protective film or according to customer's requirement
交货时间:
within 35 working days after receive the advanced
供应能力:
10 Set per Month
付款方式:
T/T, L/C
產品組 :
联系人 Ms. Shirley
No. 7 North Jiqing Road, Zheshan Industrial Park, Zhangqiu, Jinan, Shandong
The line is the special pultrusion machine used to produce FRP
rebar with different specifications. It can finish distributing
roving, impregnation, pre-molding, winding, heating and curing,
unwinding, fix-length cutting and pile up
automatically.
A. Structure principle:
This line mainly consists of roving racks, resin bath, winding,
heating oven, unwinding device, traction machine, cutting saw and
racks for finished products.
1. Roving racks: Used to place the rolls, adopts the welding
structure of steel plate, steel pipe and angle
iron.
2. Resin bath: Welded by stainless steel material, there is press
roller inside to make the roving DIP in the resin
sufficiently.
3. Winding & unwinding device: Adopts gear wheel to drive the
roller turn around the products, and wind the thread. This device
adopts frequency conversion speed-regulated mode, adjust the rotate
speed stepless.
4. Heating oven: Adopts cast aluminum heater, intelligent
temperature controller to control the temperature. The heating box
adopts mesh structure and it is easy to open it and clean the
dropping resin, filled with insulation materials
inside.
5. The material of mould is *5 or *0Cr painted with chrome on the
surface.
B. Technical parameter
Working voltage: **0V/*0Hz
Total power: *0KW
Air pressure: 0.**0.6Mpa
Center height of the line: ***0mm
Dimension: ****0mm(L)x***0mm(W)x***0mm(H)
1. Roving racks
Ivory paint, combined structure, easy
accessibility
Rolls capacity: *****0/5 layers
Dimension: 2m(L) x 0.6m(W) x 2m(H)
Standard configuration: 2 sets
2. Resin bath
Number: 1 set
Body dimension: ***0mm x **0mmx**0mm
Resin capacity: About *0kg
Support frame dimension: ***0mmx **0mmx**0mm
3. Winding & Unwinding machine
Number of winding head: 2
Winding power: 0.*5KW
Winding rotation speed: ***5rpm
Winding diameter: ***0mm Max. *0mm
Resin bath heating (optional): 1KW
Heating oven power: 2x5 zones **0V/*0Hz *0x2.4KW (length
5.5m)
Temperature control zones: 1*2x5
4. Traction machine (Caterpillar type)
Traction power: **0V/*0Hz 1.1KW
Traction speed: 0.**1m/min
Traction force: Max. *0KN
Clamping length: ***0mm
Clamping width: **0mm
5. Cutting saw
Cutting range: **0mm(W)x*5mm(H)
Cutting power: **0V/*0Hz 1.5KW
Vacuum cleaner power: **0V/*0Hz 1.5KW
Tracing cutting journey: **0mm
Length-fix mode: Limit switch
6. Racks for finished products
Square tube and steel plate welded structure
Standard configuration: Simple platform type 1 set
Dimension: 4m(L) x 0.*5m(W) x 0.9m(H)
国家: | China |
型号: | MG-26 |
离岸价格: | 获取最新报价 |
位置: | - |
最小订单价格: | - |
最小订单: | 1 Set |
包装细节: | protective film or according to customer's requirement |
交货时间: | within 35 working days after receive the advanced |
供应能力: | 10 Set per Month |
付款方式: | T/T, L/C |
產品組 : | FRP rebar line |