离岸价格
获取最新报价6 ~ 10 USD / ( Negotiable )
|200 Set Minimum Order
国家:
China
型号:
EW-AT001
离岸价格:
6 ~ 10 USD / ( Negotiable ) 获取最新报价
位置:
-
最小订单价格:
6
最小订单:
200 Set
包装细节:
blow case+logo labe+carton
交货时间:
within15-45days
供应能力:
200000 Set per Month
付款方式:
T/T, L/C
產品組 :
-
China
联系人 Mr. luca
zhong shang, shanghai
*2pcs disc brake caliper kit
(EW-AT**1)
_This tool is used to wind back brake caliper pistons when
servicing brack caliper or replacing brake
pads
_Good quality ,including left and right hand threaded
rewind tools allow the easy return of the brake piston into
the caliper to provide clearance for new brake
pads
_Application for most cars .such as audi ,Fod
,BMW,tYOTA,Nissan,VW ,GM etc
Detailed specification :
1 right or left spindler thread
1 reaction plate
*0 brake piston adapters
Material:#*5steel or *0cr if you need heat treatment
is ok .
Packing:color logo label +film + carton
packing
Meas:*6x*4x*7cm/*0sets *9kg
| ITEM NO. | EW-AT**1 |
| CONTECTS | 1 RIGHT HAND THREADED REWIND TOOLS 1 RELATION PLATE *0 BRAKE PISTON ADAPTERS |
| PACKAGE |
MEAS:*6X*4X*7CM,*9/*8KGS |
1.Remove the brake caliper from the wheel knuckle that it's
mounted to. Be sure to support it on something or with a wire
hanger so that the brake hose doesn't get
damaged.
2.Remove the outer brake pad but leave the one on the piston
side attached.
3.Retract the screw on your disc brake piston tool and slide
its plate into place where the outer pad used to be, lining
the retracted screw up with where the piston is behind the
other pad.
4.Use the attached handle to screw the screw part of the tool
towards the pad. As you do this, you will see the piston-side
pad begin to retract.
5.Do this until the pad is flush with the caliper, ensuring
the piston is fully retracted.
6.Remove your disc brake piston tool and the piston-side
pad.
7.Once the caliper has been retracted back into its bore, you
can move on to installing your new brake pads and rotors,
which will now easily slide over each other. Be sure to press
the brake pedal a few times before moving the car, to re-seat
the pads against the rotors.
| 国家: | China |
| 型号: | EW-AT001 |
| 离岸价格: | 6 ~ 10 / ( Negotiable ) 获取最新报价 |
| 位置: | - |
| 最小订单价格: | 6 |
| 最小订单: | 200 Set |
| 包装细节: | blow case+logo labe+carton |
| 交货时间: | within15-45days |
| 供应能力: | 200000 Set per Month |
| 付款方式: | T/T, L/C |
| 產品組 : | - |
