详情
Lan Cable Tester/ Network cable
Tester
Model: ***5B
Introduction
• The ***5B Lan cable tester is a newly designed tool,that can
easily test the correct pin configuration of the RJ*5/RJ*1
modular cables, *0/**0 base-T cable and Token Ring cable etc.
• By comparing one transmitting end and the corresponding
receiving end, the ***5B Lan cable tester also can test installed
cable far away by using the remote receiving unit.
• The ***5B provides the variety for wiring check, such as cable
continuity, open status, short status and miss wired.
Features
• Designed for RJ*5/RJ*1 modular cables, *0/**0 base-T cable and
Token Ring cable etc.
• The Lan cable tester can verify cable continuity, open,short
circuit and miss-wired.
• The remote receiving unit is available for installed cables far
away either on the wall plates or on the patch panels.
• Auto and manual scan function.
• Ground wire test.
• Lock status function.
• Buzzer sound warning for wire status.
• Display: LED indication for wire status.
• Meets EN******1
Operation
Loopback test
• Plug one end of the testing cable into the Rj*5 jack of
sourcing end on the master unit and another end of the testing
cable into the RJ**5 jack of receiving end on the master unit.
• Press the "" , the master unit will start a sequential
scanning process if the master unit is in "auto-scanning" mode.
• Press the "" , the pin1 LED lamps of the LED indicators
will be alight if the master unit is in "manual scanning" mode.
• Note: When the battery power is low, the testing results may
not be correct. Please replace with a new battery.
• You can choose a auto-scanning mode or a manual scanning mode
by pressing the "AUTO" or the "MANU" .
• The Lock function is available in "auto-scanning" mode.
• When the loop is "OPEN", you will hear the sound of the buzzer.
Remote test
• Plug one end of the testing cable into the Rj*5 jack of
sourcing end on the master unit and another end of the testing
cable into the RJ**5 jack of the remote receiving unit, then make
tests.
• Read the testing results from the LED indicator on the remote
receiving unit.
|
Display
|
ELD
|
|
Operating Temperature
|
0~*0℃
|
|
Power Source
|
9V x 1 Battery
|
|
Dimensions
|
Master: **2(L) x *5(W) x *9(H)mm
Remote receiving unit: *4(L) x *0(W) x *5(H)mm
|
|
Weight
|
Master: **8g
Remote receiving unit: *3g
|
Scope of Supply:
1 pc ***5B
1 pc Carrying pouch,
1 pc batteries 9V
1 pc Self-test Network cable
2 pc BNC Adapter cable
1 pc Instruction Manual
| 国家: |
China |
| 型号: |
9185B
|
| 离岸价格: |
( Negotiable ) （面議）
获取最新报价
|
| 位置: |
- |
| 最小订单价格: |
- |
| 最小订单: |
1 Set |
| 包装细节: |
carton |
| 交货时间: |
in stock |
| 供应能力: |
- |
| 付款方式: |
T/T |
| 產品組 : |
- |
