详情
Tablet—CLEAN ALUMINUM LITHOGRAPHIC
SHEETS
To consist of 1000 and/or 3000 series alloys,
to be free of paper,plastic, excessively inked sheets, and any
other contaminants.Minimum size of 3" (8 cm) in any
direction.
Tabloid—NEW, CLEAN ALUMINUM LITHOGRAPHIC
SHEETS
To consist of 1000 and/or 3000 series alloys,
uncoated, unpainted,to be free of paper, plastic, ink, and any
other contaminants. Minimum size of 3" (8 cm) in any
direction.
Taboo—MIXED LOW COPPER ALUMINUM CLIPPINGS AND
SOLIDS
Shall consist of new, clean, uncoated and
unpainted low copper aluminum scrap of two or more alloys with a
minimum thickness of 0.015 inches (.38 mm) and to be free of 2000
and 7000 series,
hair wire, wire screen, punchings less 1/2
inch (1.25 cm) diameter,dirt, and other non-metallic items.
Grease and oil not to total more than 1%.Variations to this
specification should be agreed upon prior to shipment between the
buyer and seller.
Taint/Tabor—CLEAN MIXED OLD ALLOY SHEET
ALUMINUM
Shall consist of clean old alloy aluminum
sheet of two or more alloys,free of foil, venetian blinds,
castings, hair wire, screen wire,food or beverage containers,
radiator shells, airplane sheet, bottle
caps, plastic, dirt, and other non-metallic
items. Oil and grease not to total more than 1%. Up to 10% Tale
permitted.
Take—NEW ALUMINUM CAN
STOCK
Shall consist of new low copper aluminum can
stock and clippings,clean, lithographed or not lithographed, and
coated with clear lacquer but free of lids with sealers, iron,
dirt and other foreign contamination.Oil not to exceed
1%.
Talc—POST-CONSUMER ALUMINUM CAN
SCRAP
Shall consist of old aluminum food and/or
beverage cans. The material is to be free of other scrap metals,
foil, tin cans, plastic bottles,paper, glass, and other
non-metallic items.Variations to this
specification should be agreed upon prior to
shipment between the buyer and seller.
Talcred—SHREDDED ALUMINUM USED BEVERAGE CAN
(UBC) SCRAP
Shall have a density of 12 to 17 pounds per
cubic foot (193 to 273 kg/m3). Material should contain maximum 5%
fines less than 4 mesh (U.S. standard screen size) (6.35 mm).
Must be magnetically separated material and free of steel, lead,
bottle caps, plastic cans and other plastics, glass, wood, dirt,
grease, trash, and other foreign substances. Any free lead is
basis for rejection. Any and all aluminum items, other than used
beverage cans, are not acceptable.Variations to this
specification should be agreed upon prior to shipment between the
seller and buyer.
Taldack—DENSIFIED ALUMINUM USED BEVERAGE CAN
(UBC) SCRAP
Shall have a biscuit density of 35 to 50
pounds per cubic foot (562 to 802 kg/m3). Each biscuit not to
exceed 60 pounds (27.2 kg). Nominal biscuit size range from 10"
to 13" x 101/4" (25.4 x 33 x 26 cm) to 20" x 61/4" x 9" (50.8 x
15.9 x 22.9 cm). Shall have banding slots in both directions to
facilitate bundle banding. All biscuits comprising a bundle must
be of uniform size. Size: Bundle range dimensions acceptable are
41" to 44" x 51" (104 to 112 cm) to 54" x 54" (137 x 137 cm) to
56 (142 cm) high.The only acceptable tying method shall be as
follows: Using minimum 5/8" (1.6 cm) wide by .020" (.05 cm) thick
steel straps, the bundles are to be banded with one vertical band
per row and a minimum of two firth (horizontal) bands per bundle.
Use of skids and/or support sheets of any material is not
acceptable. Must be magnetically separated material and free of
steel, lead, bottle caps, plastic cans and other plastic, glass,
wood, dirt, grease, trash,and other foreign substances. Any free
lead is basis for rejection.Any and all aluminum items, other
than used beverage cans, are not acceptable. Items not covered in
the specifications, including moisture,and any variations to this
specification should be agreed upon prior to shipment between the
seller and buyer.
Taldon—BALED ALUMINUM USED BEVERAGE CAN (UBC)
SCRAP
Shall have a minimum density of 14 pounds per
cubic foot (225kg/m3), and a maximum density of 17 pounds per
cubic foot (273kg/m3) for unflattened UBC and 22 pounds per cubic
foot (353kg/m3) for flattened UBC. Size: Minimum 30 cubic feet
(.85 m3),with bale range dimensions of 24" to 40" (61 to 132 cm)
by 30" to 52" (76 to 132 cm) by 40" to 84"(102 to 213 cm). The
only acceptable tying method shall be as follows: four to six
5/8" (1.6 cm) x .020"(5 mm) steel bands, or six to ten #13 gauge
steel wires (aluminum bands or wires are acceptable in equivalent
strength and number).Use of skids and/or support sheets of any
material is not acceptable.Must be magnetically separated
material and free of steel,lead, bottle caps, plastic cans and
other plastic, glass, wood, dirt,grease, trash, and other foreign
substances. Any free lead is basis for rejection. Any and all
aluminum items, other than used beverage cans, are not
acceptable.Variations to this specification should be agreed upon
prior to shipment between the buyer and seller.
Taldork—BRIQUETUED ALUMINUM USED BEVERAGE CAN
(UBC) SCRAP
Shall have a briquette density of 50 pounds
per cubic foot (800kg/m3) minimum. Nominal briquette size shall
range from 12" to 24" (30.5 x 61 cm) x 12" to 24" (30.5 x 61 cm)
in uniform profile with a variable length of 8" (20.3 cm) minimum
and 48" (122 cm) maximum. Briquettes shall be bundled or stacked
on skids and secured with a minimum of one vertical band per row
and a minimum of one girth band per horizontal layer. Briquettes
not to overhang pallet.Total package height shall be 48 (122 cm)
maximum. Banding shall be at least 5/8" (1.6 cm) wide by .020" (5
mm) thick steel strapping or equivalent strength.The weight of
any bundle shall not exceed 4,000 pounds (1.814 mt). Material
must be magnetically separated and free of steel, plastic, glass,
dirt and all other foreign substances.Any and all aluminum items
other than UBC are unacceptable.
Any free lead is basis for rejection. Items
not covered in the specification, including moisture, and any
variations to this specification should be agreed upon prior to
shipment between the buyer and seller.
Tale—PAINTED
SIDING
Shall consist of clean, low copper aluminum
siding scrap, painted one or two sides, free of plastic coating,
iron, dirt, corrosion, fiber,foam, or fiberglass backing or other
non-metallic items.
Talk—ALUMINUM COPPER
RADIATORS
Shall consist of clean aluminum and copper
radiators, and/or aluminum fins on copper tubing, free of brass
tubing, iron and other foreign contamination.
Tall—E.C. ALUMINUM
NODULES
Shall consist of clean E.C. aluminum, chopped
or shredded, free of screening, hair-wire, iron, copper,
insulation and other non-metallic items. Must be free of minus 20
mesh material. Must contain 99.45% aluminum
content.
TALLY All ALUMINUM RADIATORS FROM
AUTOMOBILES
Shall consist of clean aluminum radiators and
or condensers. Should be free of all other radiator type
commodities such as Talk or Ocean, shall also be free of copper,
brass, iron, plastic, foam excessive oxidation and other foreign
contamination.
Talon—NEW PURE ALUMINUM WIRE AND
CABLE
Shall consist of new, clean, unalloyed
aluminum wire or cable free from hair wire, ACSR, wire screen,
iron, insulation and other nonmetallic items.
Tann—NEW MIXED ALUMINUM WIRE AND
CABLE
Shall consist of new, clean unalloyed
aluminum wire or cable which may contain up to 10% 6000 series
wire and cable free from hair wire, wire screen, iron, insulation
and other non-metallic items.
Taste—OLD PURE ALUMINUM WIRE AND
CABLE
Shall consist of old, unalloyed aluminum wire
and cable containing not over 1% free oxide or dirt and free from
hair wire, wire screen,iron, insulation and other non-metallic
items.
Tassel—OLD MIXED ALUMINUM WIRE AND
CABLE
Shall consist of old, unalloyed aluminum wire
and cable which may contain up to 10% 6000 series wire and cable
with not over 1% free oxide or dirt and free from hair wire, wire
screen, iron, insulation and other non-metallic
items.
Tarry A—CLEAN ALUMINUM
PISTONS
Shall consist of clean aluminum pistons to be
free from struts,bushings, shafts, iron rings and non-metallic
items. Oil and grease not to exceed 2%.
Tarry B—CLEAN ALUMINUM PISTONS WITH
STRUTS
Shall consist of clean whole aluminum pistons
with struts. Material is to be free from bushings, shafts, iron
and non-metallic items . Oil and grease not to exceed
2%.
Tarry C—IRONY ALUMINUM
PISTONS
Shall consist of aluminum pistons with
non-aluminum attachments to be sold on a recovery basis or by
special arrangement between buyer and seller.
Teens—SEGREGATED ALUMINUM BORINGS AND
TURNINGS
Shall consist of aluminum borings and
turnings of one specified alloy.Material should be free of
oxidation, dirt, free iron, stainless steel, magnesium, oil,
flammable liquids, moisture and other nonmetallic items. Fines
should not exceed 3% through a 20 mesh (U.S. standard)
screen.
Telic—MIXED ALUMINUM BORINGS AND
TURNINGS
Shall consist of clean, uncorroded aluminum
borings and turnings of two or more alloys and subject to
deductions for fines in excess of 3% through a 20 mesh screen and
dirt, free iron, oil, moisture and all other non-metallic items.
Material containing iron in excess of 10% and/or free magnesium
or stainless steel or containing highly flammable cutting
compounds will not constitute good delivery.To avoid dispute,
material should be sold on basis of definite maximum zinc, tin
and magnesium content.
Tense—MIXED ALUMINUM
CASTINGS
Shall consist of all clean aluminum castings
which may contain auto and airplane castings but no ingots, and
to be free of iron, brass,dirt and other non-metallic items. Oil
and grease not to total more than 2%.
Tepid—AIRCRAFT SHEET
ALUMINUM
Should be sold on recovery basis or by
special arrangements with purchaser.
Terse—NEW ALUMINUM
FOIL
Shall consist of clean, new, pure, uncoated
1000 and/or 3000 and/or 8000 series alloy aluminum foil, free
from anodized foil,radar foil and chaff, paper, plastics, or any
other non-metallic items.
Hydraulically briquetted material and other
alloys by agreement between buyer and seller.
Tesla—POST CONSUMER ALUMINUM
FOIL
Shall consist of baled old household aluminum
foil and formed foil containers of uncoated 1000, 3000 and 8000
series aluminum alloy. Material may be anodized and contain a
maximum of 5% organic residue. Material must be free from radar
chaff foil, chemically etched foil, laminated foils, iron, paper,
plastic and other nonmetallic contaminants.
Tetra—NEW COATED ALUMINUM
FOIL
Shall consist of new aluminum foil coated or
laminated with ink,lacquers, paper, or plastic. Material shall be
clean, dry, free of loose plastic, PVC and other non-metallic
items. This foil is sold on a metal content basis or by sample as
agreed between buyer and seller.
Thigh—ALUMINUM
GRINDINGS
Should be sold on recovery basis or by
special arrangements with purchaser.
Thirl—ALUMINUM DROSSES, SPATTERS, SPILLINGS,
SKIMMINGS AND SWEEPINGS
Should be sold on recovery basis or by
special arrangements with purchaser.
Throb—SWEATED
ALUMINUM
Shall consist of aluminum scrap which has
been sweated or melted into a form or shape such as an ingot, sow
or slab for convenience in shipping; to be free from corrosion,
dross or any non-aluminum inclusions. Should be sold subject to
sample or analysis.
Tooth—SEGREGATED NEW ALUMINUM ALLOY CLIPPINGS
AND SOLIDS
Shall consist of new, clean, uncoated and
unpainted aluminum scrap of one specified aluminum alloy with a
minimum thickness of .015" (.38 mm) and to be free of hair wire,
wire screen, dirt and other non-metallic items. Oil and grease
not to total more than 1%. Also free from punchings less than
1/2" (1.27 cm) in size.
Tough—MIXED NEW ALUMINUM ALLOY CLIPPINGS AND
SOLIDS
Shall consist of new, clean, uncoated and
unpainted aluminum scrap of two or more alloys with a minimum
thickness of .015" (.38mm) and to be free of hair wire, wire
screen, dirt and other nonmetallic items. Oil and grease not to
total more than 1%. Also free from punchings less than 1/2" (1.27
cm) in size.
Tread—SEGREGATED NEW ALUMINUM CASTINGS,
FORGINGS AND EXTRUSIONS
Shall consist of new, clean, uncoated
aluminum castings, forgings,and extrusions of one specified alloy
only and to be free from sawings,stainless steel, zinc, iron,
dirt, oil, grease and other nonmetallic items.
Troma ALUMINUM AUTO OR TRUCK
WHEELS
Shall consist of clean, single-piece,
unplated aluminum wheels of a single specified alloy, free of all
inserts, steel, wheel weights,valve stems, tires, grease and oil
and other non-metallic items.
Variations to this specification should be
agreed upon prior to shipment between the buyer and
seller.
Trump—ALUMINUM AUTO
CASTINGS
Shall consist of all clean automobile
aluminum castings of sufficient size to be readily identified and
to be free from iron, dirt,brass, bushings, and non-metallic
items. Oil and grease not to total
more than 2%.
Twang—INSULATED ALUMINUM WIRE
SCRAP
Shall consist of aluminum wire scrap with
various types of insulation.To be sold on a sample or recovery
basis, subject to arrangement between buyer and
seller.
Tweak—FRAGMENTIZER ALUMINUM SCRAP (from
Automobile Shredders)
Derived from either mechanical or hand
separation, the material must be dry and not contain more than 4%
maximum free zinc,1% maximum free magnesium, and 1.5% maximum of
analytical iron. Not to contain more than a total 5% maximum of
nonmetallics,of which no more than 1% shall be rubber and
plastics.To be free of excessively oxidized material, air bag
canisters, or any sealed or pressurized items. Any variation to
be sold by special arrangement between buyer and
seller.
Twire—BURNT FRAGMENTIZER ALUMINUM SCRAP (from
Automomobile Shredders)
Incinerated or burned material must be dry
and not contain more than X% (% to be agreed upon by buyer and
seller) ash from incineration,4% maximum free zinc, 1% maximum
free magnesium,
and 1.5% maximum of analytical iron. Not to
contain more than a total 5% maximum of non-metallics, of which
no more than 1% shall be rubber and plastics.To be free of
excessively oxidized material,air bag canisters, or any sealed
pressurized items.Any variation to be sold by special arrangement
between buyer and seller.
Twist—ALUMINUM AIRPLANE
CASTINGS
Shall consist of clean aluminum castings from
airplanes and to be free from iron, dirt, brass, bushings, and
non-metallic items. Oil and grease not to total more than
2%.
Twitch—FLOATED FRAGMENTIZER ALUMINUM SCRAP
(from Automobile Shredders)
Derived from wet or dry media separation
device, the material must be dry and not contain more than 1%
maximum free zinc,1% maximum free magnesium, and 1% maximum of
analytical iron. Not to contain more than a total 2% maximum of
nonmetallics,of which no more than 1% shall be rubber and
plastics.To be free of excessively oxidized material, air bag
canisters, or any sealed or pressurized items. Any variation to
be sold by special arrangement between buyer and
seller.
国家: |
British Virgin Islands |
型号: |
-
|
离岸价格: |
( Negotiable ) (面議)
获取最新报价
|
位置: |
China |
最小订单价格: |
- |
最小订单: |
200 Metric Ton |
包装细节: |
Normal Packaging |
交货时间: |
As per requirement |
供应能力: |
3000 Metric Ton per Month |
付款方式: |
L/C, T/T |
產品組 : |
Aluminium Scrap
|