Amperometric Chlorine Sensor MCP2.1/3 Made in Germany

详情

Chlorine Sensor CP2.1 and CP3

sales (at) morwater . de

Chlorine sensor with membrane-covered, amperometric *-electrode system. For the measurement of total chlorine with greatly reduced pH dependence, also in seawater.

Product description:

• Measurement: NaClO (sodium hypochlorite), Ca(OCl)2 (calcium hypochlorite), Cl2 (chlorine gas), electrolytically generated chlorine

• Calibration: at the controller, via analytical chlorine determination by DPD*4 method (DPD*1 + DPD*3),

• Interferences: ClO2 is registered with **0 %, O3 is measured with a slope of approx. **0% (factor 1.3 with regard to the chlorine slope)

• Resolution: depending on the sensor type 0.1 ... 0.**1 ppm,

• pH range: 4 ... *2 (linear decrease with approx. 5 % per increasing pH-unit)

• Pressure range: 0.5 bar, no pressure surges and/or fluctuations,

• Temperature range: 5 ... *5 °C,

• Sensor with automatic temperature compensation

• Response time: T*0 approx. 2 min.,

• Flow rate: approx. *0 l/h, low flow-dependence,

• Shaft length: **5 mm, **5 mm, **5 mm,

• Material: microporous hydrophilic membrane, PVC-U, Peek, stainless steel 1.***1

Areas of application:

• Swimming-pool-, drinking- and sea water, surfactants are partially tolerated;

special electrolyte for the use in sea water

Scope of supply:

• CP2.1, CP3: sensor, membrane cap, electrolyte

sales (at) morwater . de