联系人 Ms. Nana
26# Chaoyuan Road, Western Industrial Area,, Huangyan,, Zhejiang
ZQ-A
series, Automatic Stretch Blowing Machine With
Preform Manual Loading
ZQ-A series, newly developed by our company, is a
two-step automatic blow-molding machine, which requires labor to
put performs into the preheater only. ZQ-A series is of one
cavity and the maximum cavity of the bottles is 0.6L,2.0L,5L. It
can blow various bottles in shapes: carbonated, mineral,
pesticide, cosmetics, wide-mouth, hot filling, and other packing
containers, which is made of plastic of crystalline type, such as
PET, PP etc.
Compared with other full-automatic series, ZQ-A series has no automatic conveyer, so it cant transfer performs automatically, but requires labors to put performs into preheater. The distinctive feature of the ZQ-A is as follows: it has saved the cost to the maximum extent; it has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine.
Settings
a).PLC colour display: OMRON(JAPAN)
b).Pneumatic parts:AIRTAC(TAIWAN)
c).Controller of preform transfer:Servo motor DELTA(TAIWAN)
d).Other electric parts are all world-famous brand
Features
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the
heat by letting the bottles rotate by itself and revolute in the
rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms
in shapes by adjusting the light tube and the length of the
reflecting board in the preheating area, and eternal temperature
in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in
each mechanical action, which will make the procedures turn into
a state of safety in case of a breakdown in certain
procedure.
F. No contamination and low noise with the air cylinder to drive
the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing
and mechanical action by dividing the blowing and action into
three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank
links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to
make the air pressure diagram of the machine easier to
understand.
K. Low cost, high efficiency, easy operation, easy maintenance,
etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.2 percent.
ZQ-A Series Hand feeding stretch blow molding
machine
| TYPE | ITEM | ZQ-A****1 | ZQ-A****2 | ZQ-A****3 | ZQ-A*****1 | ZQ-A*****2 | ZQ-A*****3 | ZQ-A*****1 | ZQ-A*****2 |
| CONTAINER | Number of cavity | 1 | 2 | 3 | 1 | 2 | 3 | 1 | 2 |
| Output | ********0 pcs/hr | ********0 pcs/hr | ********0 pcs/hr | ********0 pcs/hr | ********0 pcs/hr | ********0 pcs/hr | ******0 pcs/hr | ********0 pcs/hr | |
| Max.container volume | 0.6L | 0.6L | 0.6L | 2.0L | 2.0L | 2.0L | 5L | 5L | |
| Max.neck diameter | *8mm | *8mm | *8mm | *8mm | *8mm | *8mm | **0mm | **0mm | |
| Max.container diameter | *0mm | *0mm | *0mm | **5mm | **5mm | **5mm | **0mm | **0mm | |
| Max.container height | **0mm | **0mm | **0mm | **0mm | **0mm | **0mm | **0mm | **0mm | |
| ELECTRICAL SYSTEM | Number of lamp | *4pcs | *8pcs | *2pcs | *8 pcs | *8pcs | *0pcs | *8pcs | *8pcs |
| Max.heating power | 9kw | *2kw | *2kw | *2kw | *2kw | *0kw | *2kw | *0kw | |
| Installation power | *2kw | *5kw | *5kw | *5kw | *4kw | *5kw | *4kw | *3kw | |
| Actual power consumption | 9kw | *4kw | *0kw | *6kw | *8kw | *0kw | *0kw | *0kw | |
| AIR SYSTEM | Operatating pressure | 7kg/cm² | 7kg/cm² | 7kg/cm² | 7kg/cm² | 7kg/cm² | 7kg/cm² | 7kg/cm² | 7kg/cm² |
| Low pressure consuming | **0Ltr/min | ***0 Ltr/min | ***0 Ltr/min | **0 Ltr/min | ***0 Ltr/min | ***0 Ltr/min | ***0 Ltr/min | ***0 Ltr/min | |
| Blowing pressure | ≤*0kg/cm² | ≤*0kg/cm² | ≤*0kg/cm² | ≤*0kg/cm² | ≤*0kg/cm² | ≤*0kg/cm² | ≤*0kg/cm² | ≤*0kg/cm² | |
| High pressure consuming | ********0Ltr/min | ********0Ltr/min | ********0Ltr/min | ********0Ltr/min | ********0Ltr/min | ********0Ltr/min | ********0Ltr/min | ********0Ltr/min | |
| CHILLER WATER | Operating pressure | **6 kg/cm² | **6 kg/cm² | **6 kg/cm² | **6 kg/cm² | **6 kg/cm² | **6 kg/cm² | **6 kg/cm² | **6 kg/cm² |
| Temperatuer | *0°C | *0°C | *0°C | *0°C | *0°C | *0°C | *0°C | *0°C | |
| Consuming | ***0kcal/hr | ***0kcal/hr | ***0kcal/hr | ***0kcal/hr | ***0kcal/hr | ***0kcal/hr | ***0kcal/hr | ***0kcal/hr | |
| Flow rater | *0Ltr/min | *0Ltr/min | *0Ltr/min | *0Ltr/min | *0Ltr/min | *0Ltr/min | *0Ltr/min | *0Ltr/min | |
| MACHINE | Machine dimension | 2.5×1.4×1.7(m) | 2.9×1.*5×1.8(m) | 3.4×1.4×1.8(m) | 2.9×1.7×1.*5(m) | 3.1×1.*5×1.*5(m) | 4.*0×1.*0×1.9(m) | 3.3×1.*5×1.9(m) | 4.*5×2.0×1.9(m) |
| Machine weight | 1.5T | 1.6T | 1.9T | 1.6T | 1.8T | 2.3T | 2.0T | 3.0T |
| 国家: | China |
| 型号: | ZQ-A Series |
| 离岸价格: | ( Negotiable ) 获取最新报价 |
| 位置: | - |
| 最小订单价格: | - |
| 最小订单: | 1 Set |
| 包装细节: | General Packing |
| 交货时间: | 40 Days |
| 供应能力: | 40 Set per Month |
| 付款方式: | Other, L/C, T/T |
| 產品組 : | Blow moulding machine |
