详情
Plastic PET preform mould - *2 Cavities
Usually, Multi-cavity pet
preform mould does use the hot runner system rather
than cold runner system, so the design of hot runner system
plays an important role in mould quality guarantee. Based on
foreign advanced techniques and combined with domestic clients
demand, we adopt the valve gated design, in which each cavity has
its own heating zone and temperature is measured by independent
thermocouple.(advantages: easily avoid some problems such as
white or drawbench on bottom). Here, Mould is produced
automatically to reduce labor force.
The main components of moulds ( die core, die cavity and screw
neck) are made by injection process, which are made of special
mold steel ( Germany steel ***6) after preheating treatment in
the original factory in Germany. In this way, the mould with long
life service and high quality can be used for 2 million shots
without any maintenance, meanwhile, the wall thickness between
max. parts and min. part is not more than 0.*0mm. We adopt mould
base of *0# steel and sliding block of **8# steel. And the moulds
equipped with imported components including high-qualitied
lubricating copper plate, Germany heaters HOTSET, Germany
standard PID temperature controller. Moreover, turning center
processes make sure that every parts can match well; proper
distribution of cooling water way improve productivity effect and
molding cycle only takes *5 seconds( need proper water chiller,
bottle design and injection machine).
Our mould,
designed and developed by our engineers, is of high precision and
long life span without traditional problems. In a word, Preform
wall thickness is on error of 0.*0mm; weight difference is less
than 0.3g; **5 moulds per minute; 2 million guarantee; utmost *6
cavities in one mould.
Main feature:
1.Mold cavity from 1 up to *6.
2.Electric control system with simulating stretch testing improve
yield rate.
3.Adopt world advanced dipole taper localization technique, each
cavity self-clamp independently, ensure mould concentricity.
4.The material of mould die core and die cavity are made of
Sweden special mould steel.
5.International standard screw neck, imported nitrided steel with
high hardness is of long usage.
6.Advanced hot runner design and even heating temperature make
sure the high quality of plastic products.
7.Valve gated type without tail reduces labor force.
8.At least 2 million guarantee.
| 国家: |
China |
| 型号: |
72 Cavities
|
| 离岸价格: |
（面議）
获取最新报价
|
| 位置: |
Huangyan�China |
| 最小订单价格: |
- |
| 最小订单: |
1 |
| 包装细节: |
General Packing |
| 交货时间: |
50 Days |
| 供应能力: |
- |
| 付款方式: |
- |
| 產品組 : |
Pet preform mold & mould
|
