Automatic Water-based Film Laminator

详情

RCFM series automatic water-based film covering machine with powder removal, which uses water-based wet film covering adhesive to achieve the adhesion between paper and plastic film, is the preferred product for the printing and packaging factory to improve the product grade.As the glue coating on the film without drying, so the machine speed is high, low power consumption, low cost, easy to operate, the machine in the market is very popular with customers.
1) Feeder using the international advanced conjugate CAM technology control blowing. Suction time, the highest speed up to *2,**0 sheets/hour.
2) High speed feeder is equipped with Precode paper device.
Feeder transmission adopts cardan shaft servo system, which can make 3)longitudinal long paper, increase the service life of cardan shaft and increase the running stability.
4) The paper delivery uses the wide belt, the paper conveyance is smooth, the wide and narrow paper handoff needs not to adjust.
5) High performance servo control is adopted for edge lap. Operators only need to paper length and edge lap size to produce.
6) High - speed photoelectric detection and it can stop automatically when it is short of paper.
7) Automatic stop detection function (exclusive design) after the pressure cots roll paper, the high-speed laminating machine once the cots roll paper, its diameter will rapidly increase, increase the difficulty of rubbing roller, serious to two pressure roller extrusion scrap.
8) Self-developed paper pull gauge, thick and thin paper dual-use, easy adjustment.
9)  servo and clutch are combined to make the machine turn automatically after breaking, and the paper can be connected electrically.
*0) Film glue fixed is not moving, can be transported separately paper. This function has several advantages for customers: A.in the production of a due to paper and mechanical failure, abnormal, can be independent operation adjustment debugging. B customers in the replacement of products can be separate lapping, rules and regulations, make the paper smooth after the linkage of laminating. C. When replacing the product, it can adjust the height before and after the feeder and the amount of paper pressing (because each piece of paper has different smoothness) under the running condition, so as to make preparations for the success of starting the machine for one time. After starting the machine, the paper can be seamlessly connected to the end of the stage paper without the need for paper reloading. (because of the clutch, the transmission can be separated)
*1) when the paper is fixed, the film can be sent separately. This function has the following benefits for customers: A.When the membrane is used up and replaced with a new membrane, the defective membrane on the membrane surface can be separated out and the membrane flattened at the same time.B. When changing products, you can use the film alone, and adjust the lay of the film to be consistent with the paper. C. When the machine is shut down for a period of time due to work, the rubber roller can be wiped separately to remove the dry skin. (because of the clutch, the transmission can be separated)
*2) Gluing part adopts liquid level control system, automatic gluing. The small structure of the level control of the glue tray not only ensures that the level of the glue tray is too high to overflow the glue, but also ensures the circulation of the glue and can easily discharge the glue.
*3) The glue tray has a preheating structure. When the temperature is low, the fluidity of the glue becomes poor. After the preheating of the glue, the glue can be spread more evenly, which will intensify the activity of the glue molecules and improve the initial viscosity of the film and paper.
*4) The glue roller adopts medium height design, and the roller can meet the evenness of high and low speed gluing and reduce the production cost after balance test and treatment.
*5) Thickening and lengthening of roller shaft head. Forging process is adopted to reduce flexible deformation and ensure the uniformity of gluing and pressure. Roller bearing does not feed glue.
*6) Pressure roller external design, operator scrub maintenance more convenient.
*7) This machine adopts PLC centralized control, equipped with *-inch Hd touch screen, can timely monitor the working state of the machine, can prompt the failure status and troubleshooting methods everywhere, including the operation procedures and notes of the machine.
*8)  The protective cover is open door type,it is Convenient for machine maintenance and repair.(cover image is visible)
*9) Equipped with automatic film device, reducing the labor intensity of the operator. (cover image is visible)
*0) Paper collection roller is thickened to a diameter of ∮**5, effectively reducing the curvature of rolled paper.
*1) Feeder equipped with intermittent auxiliary blower, can make long and thin paper through.
*2) Hot pressing electrostatic powder wasting function effectively reduces the amount of glue and coated gloss is better, at the same time the paper through hot pressing roller after products dry faster, stiffness is stronger.
*3) Humanized automatic oil supply system can avoid the mechanical failure caused by insufficient lubrication due to management problems and greatly extend the service life of the machine.