Car Alarm System

详情

1. AUTO-UNLOCK The system UNLOCKS the vehicle when the user is approximately 1 - 3 meters away and trigger waves are sent to the transponder to confirm user presence. 2 seconds after the system is UNLOCKED, the vehicle enters immobilizer Mode. 2. DYNAMIC IMMOBILIZER The Immobilizer function will be automatically disabled when the system performs Hand-Shake confirmation with the transponder upon inserting the key and turning ON the ignition. The vehicle CANNOT be started with just the key as the transponder must be present as well when attempting to start the vehicle. . 3. PASSIVE LOCK While in Immobilizer Mode, whenever the vehicle doors are opened and closed, the system will check with the transponder and LOCKS the vehicle when it is not in range. * If the user is going to work/stay around the vehicle for an extended amount of time, it is recommended to turn off all Easy-Go features temporarily in order to avoid unnecessary drain of transponder battery (see below) 4. AUTOMATIC RE-LOCK Basic function of : Button 1 : a. Arm: Chirps once, parking light flash once. b. Disarm: Parking light flash twice. Button 2 : a. Press twice. Car finder: chirps twice parking light flash six times. b. Press 2 seconds: parking light on 2 seconds Easy go disable. c. Press 1 second Easy go enable: Parking light on 1 second TB****0E Layout Description Button 1 Button 2 LED The system will Re-LOCK the vehicle if 1 of 2 conditions applies: 1) The user enters and leave the Detection Zone without opening the doors; 2) The user opens and closes the doors without turning on the ignition and leave. 5. SMART TRANSPONDER LOW-BATTERY WARNING: When low battery, press for arm the system. The parking light will flash three times. After horn chirps once and parking flash once. When pressing disarm, parking light will flash 5 times after flash twice.