详情
Slitting shears are a kind of dedicated
equipment used to longitudinally cut a wide into sized
flat steels, which are used as raw stocks for steel bar
gratings.
A.
Requirements for raw stock (coil strip)
1)
Coil strip thickness: **6mm.
2)
Coil strip width: ******0mm.
3)
Coil strip I.D. :Ф******0mm.
4)
Coil strip O.D. :≤Ф***0mm.
5)
Weight of a strip coil＜3T.
6)
Coil strip material: Q***5A, B hot-milled plain carbon
steel.
B.
Main technical parameters
1)
Power supply: A.C. *-phase **0V, *0Hz
2)
Width of sized flat steel: ****0 mm
3)
Quantity of sized flat steels: ***0 pieces.
4)
Longitudinal cutting precision:
Width:± 0.*5mm,
Lateral flexure: It conforms to Chinese
Standard GB*****8 (Flat Steel GB*****8)
5)
Diameter of longitudinal cutting blade shaft:φ**0
6)
Size of longitudinal cutting blade:φ**0x**0xH mm.
7)
Material of longitudinal cutting blade: material 9CrSi, hardness
HRC *5°-*0°.
8)
Diameter of flattening rollers:φ**5mm
9)
Materialof flattening
rollers: *0Cr, hardness HRC *2°- *5°
*0)Flattening speed: *0m/min.
8)
Dimension (M): L 8 X W3 X H 1.5 (Erection length: about *0
M).
C.
Process Flow
Uncoiling—Guiding—Longitudinally-shearing—Edge
trimming**-Flattening**-Sizing—
Laterally-cutting— Flat steel
receiving.
D.
Constitution
A complete set of the equipment
essentially includes following parts:
1. Uncoiler:
Supporting weight 3T
2. Front
working platform: Length 4 M
3. Guiding-alignment
mechanism
4. Slitting
shears set: It includes main machine and driving system. The
main machine is composed of basement, stationary frame, mobile
frame, hydraulic regulation mechanism, 2 pieces of slitting
shears shafts and shaft moving up & down mechanism, etc. The
driving system includes *5KW AC variable motor, gear
reducer box, coupling, clutch, cardan, and power basement,
etc.
5. Edge
trimmer: It is inclusive of 4KW motor, gear reducer, frame,
edge-trimming shaft, edge-trimming disk, friction mechanism,
chain transmission mechanism, etc.
6. Rear
working platform: Length 2.5 M
7. Clamping-feeding-flattening
unit: It includes main machine and driving system. The main
machine is composed of basement, frame, upper & lower
pedestals, lateral beam, *3 pieces of flattening rollers, upper
roller hydraulically-moving up & down mechanism, gear reducer
etc. The driving system includes power basement, gear reducer,
*5KW motor, coupling, breaker, *3 pieces of universal
shafts, etc.
8. Sizing
unit with coder
9. Hydraulic
cutting unit: It includes basement, cutting frame, stationary
knife seat, sliding knife support, hydraulic cylinder,
etc.
*0. Hydraulic system
*1. Electric and control system: It includes A.C.
switchgear, operating console, CNC LCD screen, etc.
Note: Slitting shears can be customized according to
customer's requirement. Equipment cost greatly depends on width
of coil strip. The wider the coil strip, the higher the
cost.
Note: Slitting shears can be customized according to
customer's requirement. Equipment cost greatly depends on width
of coil strip. The wider the coil strip, the higher the
cost.
Slitting shears are a kind of dedicated
equipment used to longitudinally cut a wide coil strip into sized
flat steels, which are used as raw stocks for steel bar
gratings.
A.
Requirements for raw stock (coil strip)
1)
Coil strip thickness: **6mm.
2)
Coil strip width: ******0mm.
3)
Coil strip I.D. :Ф******0mm.
4)
Coil strip O.D. :≤Ф***0mm.
5)
Weight of a strip coil＜3T.
6)
Coil strip material: Q***5A, B hot-milled plain carbon
steel.
B.
Main technical parameters
1)
Power supply: A.C. *-phase **0V, *0Hz
2)
Width of sized flat steel: ****0 mm
3)
Quantity of sized flat steels: ***0 pieces.
4)
Longitudinal cutting precision:
Width:± 0.*5mm,
Lateral flexure: It conforms to Chinese
Standard GB*****8 (Flat Steel GB*****8)
5)
Diameter of longitudinal cutting blade shaft:φ**0
6)
Size of longitudinal cutting blade:φ**0x**0xH mm.
7)
Material of longitudinal cutting blade: material 9CrSi, hardness
HRC *5°-*0°.
8)
Diameter of flattening rollers:φ**5mm
9)
Materialof flattening
rollers: *0Cr, hardness HRC *2°- *5°
*0)Flattening speed: *0m/min.
8)
Dimension (M): L 8 X W3 X H 1.5 (Erection length: about *0
M).
C.
Process Flow
Uncoiling—Guiding—Longitudinally-shearing—Edge
trimming**-Flattening**-Sizing—
Laterally-cutting— Flat steel
receiving.
D.
Constitution
A complete set of the equipment
essentially includes following parts:
1. Uncoiler:
Supporting weight 3T
2. Front
working platform: Length 4 M
3. Guiding-alignment
mechanism
4. Slitting
shears set: It includes main machine and driving system. The
main machine is composed of basement, stationary frame, mobile
frame, hydraulic regulation mechanism, 2 pieces of slitting
shears shafts and shaft moving up & down mechanism, etc. The
driving system includes *5KW AC variable motor, gear
reducer box, coupling, clutch, cardan, and power basement,
etc.
5. Edge
trimmer: It is inclusive of 4KW motor, gear reducer, frame,
edge-trimming shaft, edge-trimming disk, friction mechanism,
chain transmission mechanism, etc.
6. Rear
working platform: Length 2.5 M
7. Clamping-feeding-flattening
unit: It includes main machine and driving system. The main
machine is composed of basement, frame, upper & lower
pedestals, lateral beam, *3 pieces of flattening rollers, upper
roller hydraulically-moving up & down mechanism, gear reducer
etc. The driving system includes power basement, gear reducer,
*5KW motor, coupling, breaker, *3 pieces of universal
shafts, etc.
8. Sizing
unit with coder
9. Hydraulic
cutting unit: It includes basement, cutting frame, stationary
knife seat, sliding knife support, hydraulic cylinder,
etc.
*0. Hydraulic system
*1. Electric and control system: It includes A.C.
switchgear, operating console, CNC LCD screen, etc.
Note: Slitting shears can be customized according to
customer's requirement. Equipment cost greatly depends on width
of coil strip. The wider the coil strip, the higher the
cost.
| 国家: |
China |
| 型号: |
Model （2-6）X500mm
|
| 离岸价格: |
（面議）
获取最新报价
|
| 位置: |
China |
| 最小订单价格: |
- |
| 最小订单: |
- |
| 包装细节: |
Container |
| 交货时间: |
- |
| 供应能力: |
- |
| 付款方式: |
L/C |
| 產品組 : |
- |
