详情
Press-locked Steel Grating Production Line
Equipment consists of one set of flat steel punch-cutting machine
and one set of forming-welding machine for press-locked steel
grating.
A.
Flat Steel Punch-Cutting Machine
1. Purpose
The
Flat Steel Punch-Cutting Set is used for punching and cutting of
flat steel In accordance with design requirement of
products.
2.
Features and Technical Parameters
a)
Touching screen console is used, by which parameters can be
pre-set and troubles can be displayed.
b)
Numeral control servo system is used to control stepping of work
piece。This leads to high precision of work piece
after it is machined.
c) Procedures of punch and cutting
are automatically performed.
d) Operation is simple and
production efficiency is high.
3. Main Technical Parameters
a) Coiled strip steel, as raw
stocks, is utilized to make flat steels.
b) Finished flat steel : Thickness
**5mm, Width ****0mm, Length ********0mm.
c) Punch,
Cutting and Feeding Speed
Punch <*0 times/min. Cutting <*0
times/min, Feeding Speed <*0 M/min
B.
Forming-Welding Machine for Press-locked Steel
Grating
1. 1 Power supply
*-phase A.C.**0KVA/**0V±5％/*0Hz
independent power supply to switchgears in the
workshop.
1.2 Compressed Air
Compressed air Pressure 0.6Mpa， Working
pressure 0.*5Mpa， Flow rate﹥1m3/min.Compressed air is subject to dry
treatment.
1.3 Cooling Water
Inlet
temperature ＜*0ºC，flow
rate﹥**0L/min，pressure﹥0.*5Mpa，
1.4 Main Machine
Structure: *-cylinder *-column
hydraulic press is used in main machine. Pressure is variable,
able to goes up to max.*****0T.
1.5 Power supply for welding
3
sets of medium frequency controllers are used for single cross
bar; 4 sets of medium frequency controllers are used for double
cross bars, Each set of controller respectively control 2 sets of
medium frequency transformers and then medium rectifiers are
utilized to change into D.C. power. 6 groups of power supply are
linked in parallel. Welding voltage ranges from 0 to *2V, being
stepless –variable. Secondary output current ******0KA, Power
frequency **0Hz.
1.6 Welding
Speed
One
piece or two are automatically welded at a time. Cross bar
centers﹥*5mm.One welding cycle takes 5.5 seconds.
Welding time only takes **0ms.
1.7
Applicable flat steel
|
Item
|
Bearing centers
|
*0
|
*0
|
|
Bearing bar（mm）
|
Height
|
****0
|
****0
|
|
Thickness
|
**7
|
**7
|
|
Grating panel（mm）
|
Length
|
***0
|
***0
|
|
Width
|
******7
|
********7
|
|
Cross bar（mm）
|
Section
|
*0X3、*0X4
|
*0X3、*0X4
|
|
Length
|
***0
|
***0
|
|
Cross bar centers
|
﹥*5mm
|
C. Main Features
a) Medium frequency
reverse power supply is used, The machine is automatically
controlled through man-computer interface, possessing these
advantages such as short welding time, fast welding speed, firm
welding joints and energy conservation etc. Energy consumption of
the machine is lower ****0% thanLoads of three phases are kept in balance,
resulting in high power factor and ****5% power
saving.
b)Multi-pulse temper
treatment to welding points in welding course. Owing to
application of the welding process, the problems of unstable
welding quality and brittleness of welding joints for harden able
steel can be solved.
| 国家: |
China |
| 型号: |
GYSH-1000x2
|
| 离岸价格: |
（面議）
获取最新报价
|
| 位置: |
China |
| 最小订单价格: |
- |
| 最小订单: |
- |
| 包装细节: |
Container |
| 交货时间: |
- |
| 供应能力: |
- |
| 付款方式: |
L/C |
| 產品組 : |
- |
