Product Introduction: This series of crusher is
suitable for crushing all kinds high of high hardness ores and
rocks, with advantages of reliable structure, high efficiency, easy
adjustment, economical and practical in use. When unable-to-crushed
object pass the crushing cavity or the machine is overload for some
reason, the spring safe system takes into action with the
discharging enlarging. Object will go out from crushing cavity. If
the object blocks the discharging opening, cavity clearing system
will be needed to enlarge the opening so that the object will be
brought out from the cavity. With the action of the springs, the
opening will automatic reset to recover the normal operating of the
cone crusher. Cone crusher is devided into coarse crushing cone
crusher, medium crushing cone crusher and fine crushing cone
crusher. Users can choose from their different needs.
Features: 1. Composite cone crusher use high
manganese steel castings and can be used for hard rock crushing.
High wear-resisting
2. Tapered roller bearings on both ends of the drive shaft,
driving by heavy loading bevel gear, bearing support use framing
seal to prevent oil leakage;
3. Dust ring floated by the spring inside the ball seat takes a
role of regulating role during the process of the running;
4. With a protection of spring over release of iron, we can
ensure the normal operation of crushing system;
5. Cone crusher including external pumps, tanks, piping
lubrication system. When the oil temperature is too high or the
oil speed is too slow, the crusher will automatically stop
operating.
6. Novel unique, simple and reasonable structure makes a smooth
and low cost operating. Operating Principle:
When cone crusher operating, forced by the rotary pendulum
movement around the fixed point of the eccentric sleeve, the
motor rotates from the pulley or coupling, the shaft and the
cone. The crushing wall of the cone is sometimes close to and
sometimes away from the surface of rolling mortar wall which is
fixed on the adjusting sleeve. So the ore is crushed with the
action of continuously impacting, extruding and flexure inside
the crushing cavity. The motor drives the eccentric sleeve
rotating through bevel gear to make the rotary pendulum movement
of the crushing cone. The crushing cone is sometimes close to and
sometimes away from the fixed cone to finish crushing and
discharging. Springs compress junction between support sleeve and
support body. When unable-to-crushed object pass the crushing
cavity or the machine is overload for some reason, the spring
safe system takes into action with the discharging enlarging.
Object will go out from crushing cavity. If the object blocks the
discharging opening, cavity clearing system will be needed to
enlarge the opening so that the object will be brought out from
the cavity. With the action of the springs, the opening will
automatic reset to recover the normal operating of the cone
crusher. Surface of crushing cone spreads with high manganese
steel lining board and the discharging opening can be adjust by
both hydraulic and manual operation.
