DIN582 Ring Nuts

详情

Steel Ring Nuts DIN **2

1. Feature:

Forged Eye bolt, Lifting Eye Bolt, DIN **0 Eye Screw
Surface: Galvanized, zinc plated, chromed plated
Material: Carbon steel C*5, C*5E, SS, Q**5 etc
Type: C*5, normal WLL and specification, or as you needed
Packing: Plastic bags, carbon boxes, wood pallets and iron pallets
Thread rolling: Threads under metric system or British system
Packing: Carton +Pallet


2. Products introduce:

Taking into account a high safety factor in relation to the minimum breaking strength, the ring bolts according to DIN **0 and the ring nuts according
To DIN **2 have the load-bearing capacities as indicated in table 1. The load-bearing values apply for steel C*5 E and stainless steel A2/A4 without
Restriction in a temperature range of *0 ° C to ***0 ° C.
Ring bolts and ring nuts are valid according to the ***6/*2/EC Machinery Directive as load-carrying equipment and are subject to CE labelling.
Furthermore, they must show a specication of the minimum carrying force (WLL) as well as the specication of the material if required for safe usage.
The version of DIN *******0 and DIN *******0 not yet published at the time of printing of this catalogue also prescribes that a marking of an arrow be
Present in the direction of the axis (picture 1) so that the user can tell that the WWL specied on the product only applies in the direction of the axis.
Subsequent colour-coded marking of ring bolts and nuts (especially in red) is to be avoided so that they do not get mistaken for high-strength suspension
Points



Instructions for the use of lifting eye nuts DIN **2
Lifting eye nuts conforming to this standard are primarily intended as permanent attachments on
Equipment such as motors, control cabinets, gear boxes, etc. For their transport. When used as temporary
Attachments on larger objects such as large tools for transportation only, the next largest thread size
Should be used. In case of multi-leg slings please refer to DIN EN ****4.
With the use of screws a washer should used under the head.
Picture 1 — Side pull must be avoided
Before being used, eye nuts should be checked for correct seating and apparent damage (e. G. Corrosion,
Deformation)
Deformed eye nuts should be discarded.
Subsequent color identification (particular in red) must be avoided, to exclude any confusions with highstrength attachment points.
The safe working load values given in table 1 are based on the following assumptions:
· The eye nut is fully tightened by sufficient thread depth;
· The eye nut must be in the correct plane and the collar must sit evenly on the contact surface;
· The length of the bolt thread is sufficient
· The material of the bolt on which the eye nut will be screwed is of adequate strength