ESDMAN_DUAL WRIST STRAP FOOTWEAR TESTER _001-6505

详情

ESDMAN_001-6505

This instrument is produced according to ISO/CD8782-1 standard , can test ground resistance of hand & foot, there is LED display & alarm. It is an absolutely necessary tester in static control industry. SURPA-6505 uses 9V battery , low voltage and safety. User can easily adjust the height of tester.

Operation：

1.Test ESD shoe/heel grounder:

DialSelective switchtofoot wear,then stand on testing board after wearing ESD shoes,pressPRESS TO TESTkey.In this way,Left light will display the ground resistance of the left foot wearing ESD shoe & Right light will show the ground resistance of right foot wearing the ESD shoe.

Testing value sheet

2.Testing wrist strap,anti-static shoes/heel grounder 

Dial Selective switchto WRSIT STRAP&FOOTWEAR key,connect wrist strap and plug socket or alligator clip into the outlet,then pressPRESS TO TESTkey,the value shown on the top middle place is wrist strap resistance.

Testing value sheet

How to fix:

1.  Loose sleeve,insert bracket through testing board and screw sleeve,as chart A

2.Fix up connecting wires on the two sides of testing board separately and fasten the bracket on the board.(please well note:2 connecting wires correspond two testing loops,blue wires is for left footwear and black for right )

3.Fasten tester batholith on the bracket and fetch connecting wires out.as chart B.

4.Insert connecting wires into tester jack,as chart C.The blue wire is on the left and black is on the right,as chart D.

How To Adjust Height:

Contrarotate sleeve for several circles and adjust bracket to a good height,then screw the sleeve.

Hanging Installation:

In order to save time,we can use hanging installation.Take tester out and use another set of connecting wires.Install connecting wires according to mark,another ender of wire link to the soleplate.There are two nails with 86mm of distance on the wall.The user can hang the tester on the nails.