Flyash Roasting Machine

详情

Flyash Roasting Machine

Flyash Roasting Machine is novel and leading in structure and technology respectively, and generally employed for the drying of flyash ,clay ,slag ,coal ,ore in the construction and chemical industries.The main body of flyash dryer is constituted of three concentric circles which are of different diameter, and horizontal rolling by the belts.The fuel ,gas and coal airheater is installed in the the feed inlet, the discharge end is fed with dust cover and automatic baiting device. Via pipeline, the dust cove is connected with dust remover, and the dust catching machine, feeding equipment, conveyor can specilally designed according to customers' requirements.

Flyash dryer machine is designed according to the features of flyash which the moisture is higher than other materials; the proportion is lower than other materials, big flow ability in the drying process.The working process of the telescope-feed 3 drum dryer as follows:The flyash is conveyed to the drying machine through feed inlet ,then lifted from the inner tube to themiddle tube, finally to the outer tube ,and finished in the tube of discharge end.

Characteristics of Flyash Roasting Machine:
1.The moisture of finished products can be controlled under 0.5%,is the indispensable equipment for flyash and ore powder production line.
2. Excellent heat preservation ,the thermal efficiency can reach above *0%,increased by *5%(The heat efficiency of traditional dryers is merely confined to *5% ).
3. Coal ,Gas ,oil all can act as fuel , granular and powder materials that smaller than *0mm are also applied to the drying machine.
4. Compared with single drum roasting machine, It’s land consumption and electricity consumption were economized *0% and *0% respectively.
5. Adopted alloy steel plate with abrasive resistance 4 times than common steel plate.
6. The eventually moisture indexes can be adjusted on the ground of consumers’needs.
7. The Roasting equipment is of long life.
8. No need for wheel gear in large and small size ,only pull wheel is required.