详情
Main of Characteristics of tyre pyrolysis plant:
1. National patent, Full open door: Speedy loading in and
steel-drawing out, easily cooling down after one batch finished,
saving time;
2. National Patent, Carbon black discharging system; completely
enclosed design to prevent dust under high temperature;
3. National Patent, Gas scrubbers: remove acid gas and dust from
smoke, meeting environmental protection standard;
4. National Patent, Outer Gearing Drive system: making the
rotation and operation of the plants very stable, less noise;
5. National Patent: Special designed heat insulation shell;
6. Direct heating system: Enlarging heating square to enlarge the
lifetime of reactors, easy to control the temperature;
7. High oil output and high oil quality;
8. Combustible gas recycling system: used as supporting fuel for
the plants or compressed into LPG to save energy and Prevent
pollution.
Final Products:
There are three kinds of final products: tire oil, crude carbon
black, steel wires whose output and usage as follows:
Tire oil: *0%**5%, widely used as fuel oil for hotels, steel
factories, etc... Or used for generates to get electricity.
Carbon black: around *5%, used for construction bricks or as
filter of rubber products after process.
Steel wire: *2%**5%: sold or reprocessing.
Combustible gas: about 5%, can be
recycled and used during process as fuel or collected even
compressed into liquid gas, used as fuel or to get
electricity.
Safety:
Service and Support Know-how
transfer, engineering and design of the whole process furthermore
We suggest following services for consultancy, supervision during
the erection and commissioning with test run. Our project engineer
will go to the site and offer instruction for the machine
installation, the commissioning and test run. Duration is totally
*0 days, including travel time. Working process:
a. Waste Materials are loaded into the pyrolysis
chamber by the Feeding machine or manually and then doors are
locked with our tight sealed door lock design.
b. System is started with the control panel operated by
operator. The process is automatic and controlled by our control
system. The first stage of the process is to heat up and dried up
the waste. c. Pyrolysis of the waste will
begin once reaching a certain temperature and the sync gas is
generated from the waste. d. The sync gas
will be converted into oil by the condensers and stored in the oil
tank. Small quantity of sync gas which is not converted into oil is
scrubbed by the scrubbing system and cleaned before released to
air. e. Upon completion of the pyrolysis
process, chamber will be required to cool to a certain temperature
before releasing the carbon black. f. The
carbon black will be released by our high speed carbon discharge
system automatically and stored in a special tank which is to
prevent pollution. g. Steel (for tires
contain steel wires) will be removed at the final stage upon the
carbon black being fully released. Steel removal requires opening
the big door. h. The next batch of
process can be continued.
| 国家: |
China |
| 型号: |
TS-7
|
| 离岸价格: |
（面議）
获取最新报价
|
| 位置: |
China |
| 最小订单价格: |
- |
| 最小订单: |
1 Set |
| 包装细节: |
container |
| 交货时间: |
20-30days |
| 供应能力: |
50 Set per Month |
| 付款方式: |
L/C, T/T |
| 產品組 : |
- |
