详情
Gypsum production
linedetailed
introduction:
We use the advanced technology to
produce the gypsum power plant from *0,**0 tons per year
to **0,**0 tons per year
Gypsum powder production
line production
process
The gypsum stone is crushed into
granule less than *5mm with crusher. It is stored in raw material
silo, then conveyed into grinding mill to make gypsum powder. The
powder is classified through a classifier. The qualified powder
in required fineness shall be carried to the calciner, while the
unqualified powder shall be returned to the grinding mill for
further process. The calcined gypsum powder (it is usually called
Plaster of Paris) shall be stored in the finished product silo
for preparation of plasterboard raw material.
Plaster production
line calcination
process
The calcination is the important
part during the whole system; our company develops a new advanced
equipment**-boiling system.
The boiling furnace body consists
of delicate and intensive cooling coil pipe. Put the heat
conductive oil in the pipe, and release the heat into the inside
of furnace. There is a Roots blower under the bottom of boiling
furnace, and blow the air into the furnace, until blowing the
powder into boiling status. Under a certain temperature, the
dried and dehydrated powder become light, and flow to the outlet
automatically. The quality of this kind of gypsum powder is
stable
The Characteristics and Performance
of plaster of gypsum powder machinery:
Simple structure, it is not easily
broken
Occupy small room
With low energy consumption
It can produce good performance
gypsum powder
With best dust collecting
Any ideas on our gypsum powder
equipment, please feel free to talk with us!
