联系人 Ms. Lisa
shijiazhuang, Shijiazhuang, Hebei
HDPE-High Density
Polyethylene
Grade: Blow molding grade, injection molding
grade, etc.
High-density polyethylene (HDPE) or
polyethylene high-density (PEHD) is a polyethylene thermoplastic
made from petroleum. It takes 1.*5 kilograms of petroleum (in terms
of energy and raw materials) to make one kilogram of
HDPE.
Application: Make barrela, plastic bottle and
bag, make all kind of pipes, make shading net, and make cable
wire-insulating.
| Property | Unit | Typical Value |
| Mass density | g/cm 3 | 0.****0.**9 |
| Melt flow Rate(**0 centidegree /2.*6kg) | g/*0min | ≤1.0 |
| Tensile yield strength | MPa | ≥*9.0 |
| Flexural modulus | Mpa | ≥**5 |
| % | ≥**0 | |
| Impact Embrittlement temperature | centidegree | MAX ***8 |
| Dielectric Constant | **0KHZ | 2.*2 |
| 1MHZ | 2.*1 | |
| Loss Tangent | **0KHZ | MAX 0.***1 |
| 1MHZ | MAX 0.***1 | |
| Volume resistivity | OHM-CM | MIN 1x*0 *5 |
| 国家: | China |
| 型号: | high-density polyethylene |
| 离岸价格: | 获取最新报价 |
| 位置: | china |
| 最小订单价格: | - |
| 最小订单: | 10 Metric Ton |
| 包装细节: | 25kg/bag 16ton/20'FCL 28ton/40'FCL |
| 交货时间: | Within two weeks after received the prepaid |
| 供应能力: | - |
| 付款方式: | T/T, L/C |
| 產品組 : | - |
