HWES 10 bent welding power distribution cabinet

详情

1. The enclosure cabinet is made by the steel with ten times bent for highly 

strength, so the structure is firm, able to carry a heavy load. The cost of this 

cabinet is lower than the PS cabinet. 

 

2. We apply SPCC cold rolled steel or stainless steel for all of our products, 2mm 

thickness of front door, 1.5mm thickness of panels, 2.5mm galvanized mounting 

plate. 

 

3. The size of ES and PS series cabinets can be matched with each other, and 

the parts and accessories are versatile. They can be quickly installed. 

 

4. The front door is of single or double door, with an Angle of **0 degrees, the 

height of the door to the ground is *5mm.the reinforcing frame is inside the 

front door, equipped with to *5 mm spacing of mounting holes. In addition, the 

front door provides mounting crossbar to strengthen it and more flexible to 

binding cables. 

 

5. The rear panel is fastened by bolts and fasteners. 

 

6. Mounting plate can be adjusted back and forth for the distance of multiple 

of *5mm, the door, panels are all able to earth. There are 3 adjusted fixed shelf 

at the bottom for cable arrangement.