HWG-WLD

详情

HWg-WLD detects water leaks or water floods along the entire length of the sensing cable. The sensing cable detects even the smallest volume of water, ethylene glycol, or other conductive liquid. HWg-WLD can be ordered in two versions depending on the supply of power (power adapter or PoE IEEE **2.3af).

The sensing cable detects as little as a few drops of the liquid, and can be used to detect condensation. After flooding, the cable can be dried and reused.

HWg-WLD features a built-in web server and SNMP support. In case of an alarm, the device sends an e-mail or SNMP trap.

Alarms can be also signaled by switching a remote relay over the Ethernet. When a leak is detected, HWg-WLD activates a relay of a remote Poseidon or Damocles unit (Box**-Box mode).

• Sensing cable can be 2 *5 m (6.5 **0 ft) long
• Alarm alerts by e-mail, SNMP trap, or by activating a relay output
• Detects even the smallest volumes of liquids, sensing cable can be dried and reused

Typical applications involve monitoring of coolant piping in air conditioning systems or water detection around pipes in technical areas.

Detection of water leaking from pipes(cable runs along the pipes)

• Detection cable laid along the walls

• Under raised floors

• Above suspended ceilings

• Detection of water leaks in drip trays

• Detection of water leaks under A/C outlets

The water leak sensing cable can be wrapped around the piping, suspended under the piping, or laid on the bottom of the pipe duct.