Ionizer Auto Air Nozzle(gun) - setting photo sensor type

 

Product Description

 

 

The Product is comprised of Auto Nozzle, Photo Sensor, Bellows and High Pressure Generator. It is easily installed at any place including the automated production lines, assembly lines, mobile LCD optical lens lines and injection film lines. The Product is not only removes electrostatic, but also dust at the same time. In particular, the Photo Sensor attached to the Nozzle Head detects objects to spray air or ion automatically thereto for enhanced user convenience.

 

 

 

 

 

 

Application and Effect

 

1.Removing electrostatic and dust from plastic and injection products;

2.Removing electrostatic and foreign materials from electronic products and precision optical devices;

3.Removing electrostatic and foreign materials from LCD and display products;

4.Removing electrostatic and foreign materials from mobile parts;

5.Removing electrostatic from precision and electronic products, and PCB;

6.Removing electrostatic and foreign materials before printing

 

 

 

 

 

Method of Use

 

1.Power the Auto Nozzle. (AC**0V)

2.Connect the air hose (8).

3.Fix the position by moving the Bellows up or down. (DO NOT turn **0o as it may cause breakdown.)

4.Turn on the power switch and place a part in front of the Nozzle. The Sensor will detect the part and start spraying it with ion and air to remove electrostatic and foreign materials.

5.As air is sprayed, electrostatic is instantly removed.

6.The sensing distance can be adjusted within the range of *0mm ~ **0mm.

(To be adjusted at the center of the Sensor.)

 

 

 

 

 

Caution

 

1.Clean and remove, periodically (once a week), foreign materials from the ion needle on the Nozzle to prevent deterioration.

2.Wet the cotton buds or brush with alcohol to clean the needle.

3.Turn power OFF when cleaning the ion needle. (be aware of high voltage)

4.Do not get the ion needle in contact with metallic objects.

5.Do NOT adjust the ion balance as it may jeopardize the ion balance.

   (It is factory set, and it does not need to be adjusted.)

 

 

Specifications 

 

Nozzle Size                     **0**5L

Air Pressure                    *1~8kg/㎠

Head                            - Black acetal  specially processed

Ion Discharge Needle       -Tungsten 1.5MM 2EA

Sensor Range                 - Photo sensor Min *0mm~**0mm

Nozzle Joint(length)         - **0mm *7 knuckles, 3/DC Power Controller

Input voltage                  - AC**0V, *0/*0 HZ

Output Power                 - 7 KV DC TYPE

Power Consumption         - *5W

Ion balance                      ±*0V

Weight / Dimension         - 1.5Kg /**3(w)**5(h)***4(d)mm

Case Material                  - EGI/painted

Input Air                        - 1~8kg/㎠