Joker Plus ipek Mat Water Based Interior Wall Paint

详情

Joker Plus İpek Mat

Water Based Interior Wall Paint



Product Definition

Acrylic emulsion based, silicone enhanced, scrub resistant, easily cleanable, silky matt interior wall paint.



Application Areas

> On interiors, suitably prepared new mineral surfaces such as concrete, mortar, cement panel, gypsum panel etc, on old painted surfaces, putty, glass textile or wallpaper.



Features

> Silky texture provides walls a smooth and unique gloss with perfect light dispersion.

> Perfect scrub resistant, easy to clean and stain free.

> Superior hiding power.

> Easily re-touchable, does not leave roller marks.

> High water vapour permeability, allowing building to breathe.

> Since solvent free and practically odorless.

> Water thinnable and ecologically compatible.



Technical Features

(at *3°C and *0% RH)



General Data:

Colors: Thousands of colors possible from a mixture of white and A, B, C bases by using the Renk Bankası and the Renk Ustası.

Composition: Acrylic emulsion based

Thinner: Water

Density: Approx. 1.*6 gr/cm³



Application Data:

Application Temperature Range: (*5°C) - (**5°C)

Drying Time: Recoatable after 6 hours and thoroughly dry after *4 hours. Lower temperatures and/or higher relative humidity will lengthen the drying process.

Consumption: Depending on the evenness and the porosity of the surface approximately 0.**0 It/m² per coat.

Application Tools: Brush, Roller, Airless spraying equipment



Performance Data:

Water Vapour Permeability SD (m) (TS EN ISO ***3 - 2): Approx. 0.**0

Scrub Resistance (cycle) (ASTM ***6): > **0

Gloss (*0°) (ISO ***3): Approx. 5

Service Temperature: (**0°C) - (**0°C)



TS EN ****0: Classifcation

Wet Scrub Resistance: Class 1

Contrast Ratio: Class 2 (5.5 m²/lt)

Largest Grain Size: Class S1

Gloss: Class G2

Fungi and Algae Resistance: Class K2



Application Instructions

> The substrate must be cleaned from dust, dirt, oil and old blistered coatings that may prevent good adhesion. The surface should be made sound, clean and dry. New cementitous substrates must be cured at least *8 days before application.

> Sand glossy and/or old solvent based painted surfaces to improve adhesion and remove the occurring powder. Thoroughly and remove the occurring powder.

> If necessary, fill the surface cracks and even the substrate with Kale İNCE AKRİLİK MACUN or Kale MACUNART.

> To have a fine, silky texture smoothen the entire surface by using Kale İNCE AKRİLİK MACUN or Kale MACUNART.

> Prime the solvent based painted surfaces or water based painted surfaces on which color change is desired and old painted water based and very dirty surfaces with Kale SİLASTAR and new and porous surfaces with Kale SATEN ALÇI ASTARI or Kale SİLASTAR.

> After thoroughly mixing, thin JOKER PLUS İPEK MAT with clean water up to a maximum of *0% by volume and apply in two coats by using a brush, roller or spray system.

> Wait for a minimum of 6 hours before applying the final coat.

> Clean the application tools with water.

> Ensure that the air and surface temperatures are above 5°C during the application and *4 hours following the application.



Warnings

> S2 Keep out of t he reach of children

> S*4/*5 Avoid contact with skin and eyes.

> S*6 lf swallowed, seek medical advice.



Storage

> Store between 5°C**5°C in its unopened pail.



Packaging

> 2.5 lt, 7.5 lt and *5 lt pails.

> 2.5 lt packages packed together in 2s.



Quality Documents

TS ***8Joker Plus İpek Mat

Water Based Interior Wall Paint



Product Definition

Acrylic emulsion based, silicone enhanced, scrub resistant, easily cleanable, silky matt interior wall paint.



Application Areas

> On interiors, suitably prepared new mineral surfaces such as concrete, mortar, cement panel, gypsum panel etc, on old painted surfaces, putty, glass textile or wallpaper.



Features

> Silky texture provides walls a smooth and unique gloss with perfect light dispersion.

> Perfect scrub resistant, easy to clean and stain free.

> Superior hiding power.

> Easily re-touchable, does not leave roller marks.

> High water vapour permeability, allowing building to breathe.

> Since solvent free and practically odorless.

> Water thinnable and ecologically compatible.



Technical Features

(at *3°C and *0% RH)



General Data:

Colors: Thousands of colors possible from a mixture of white and A, B, C bases by using the Renk Bankası and the Renk Ustası.

Composition: Acrylic emulsion based

Thinner: Water

Density: Approx. 1.*6 gr/cm³



Application Data:

Application Temperature Range: (*5°C) - (**5°C)

Drying Time: Recoatable after 6 hours and thoroughly dry after *4 hours. Lower temperatures and/or higher relative humidity will lengthen the drying process.

Consumption: Depending on the evenness and the porosity of the surface approximately 0.**0 It/m² per coat.

Application Tools: Brush, Roller, Airless spraying equipment



Performance Data:

Water Vapour Permeability SD (m) (TS EN ISO ***3 - 2): Approx. 0.**0

Scrub Resistance (cycle) (ASTM ***6): > **0

Gloss (*0°) (ISO ***3): Approx. 5

Service Temperature: (**0°C) - (**0°C)



TS EN ****0: Classifcation

Wet Scrub Resistance: Class 1

Contrast Ratio: Class 2 (5.5 m²/lt)

Largest Grain Size: Class S1

Gloss: Class G2

Fungi and Algae Resistance: Class K2



Application Instructions

> The substrate must be cleaned from dust, dirt, oil and old blistered coatings that may prevent good adhesion. The surface should be made sound, clean and dry. New cementitous substrates must be cured at least *8 days before application.

> Sand glossy and/or old solvent based painted surfaces to improve adhesion and remove the occurring powder. Thoroughly and remove the occurring powder.

> If necessary, fill the surface cracks and even the substrate with Kale İNCE AKRİLİK MACUN or Kale MACUNART.

> To have a fine, silky texture smoothen the entire surface by using Kale İNCE AKRİLİK MACUN or Kale MACUNART.

> Prime the solvent based painted surfaces or water based painted surfaces on which color change is desired and old painted water based and very dirty surfaces with Kale SİLASTAR and new and porous surfaces with Kale SATEN ALÇI ASTARI or Kale SİLASTAR.

> After thoroughly mixing, thin JOKER PLUS İPEK MAT with clean water up to a maximum of *0% by volume and apply in two coats by using a brush, roller or spray system.

> Wait for a minimum of 6 hours before applying the final coat.

> Clean the application tools with water.

> Ensure that the air and surface temperatures are above 5°C during the application and *4 hours following the application.



Warnings

> S2 Keep out of t he reach of children

> S*4/*5 Avoid contact with skin and eyes.

> S*6 lf swallowed, seek medical advice.



Storage

> Store between 5°C**5°C in its unopened pail.



Packaging

 *5 lt pails.





Quality Documents

TS ***8