Low Cost Fully Automatic Earth Interlocking Clay Brick Block Burning Making Machine Vacuum Forming Extruder By Shandong Lingtong Heavy Industrial Mecha,

产品规格

Brand Name: Shandong Lingtong
Type: Hollow Block Making Machine
Processing: Brick Molding Machine
Brick Raw Material: Clay
Method: Vacuum Extruder
Automatic: Yes
Capacity: 7000 pc - 22000 pc / h

详情

Lingtong clay brick machine models and relevant parameter:

Specification	Productivity (Standard Brick pcs/h)	Extraction Pressure (Mpa)	Vacuum Degree (%)	(kw) Motor Power	Mixing blade diameter
JKY0/**4.0	**********0	4.0	≤0.9	*0/0	**0
JKY5/**4.0	**********0	4.0	≤0.9	0/2	**0
JKB5/**4.0	**********0	4.0	≤0.9	*0/0	**0
JKB0/5	**********0	3.0	≤0.9	0~2/0~5	**0
JKB5/**3.0	**********0	3.0	≤0.9	*0/5	**0
JKB0/**2.0	********0	2.0	≤0.9	*0	**0

Product Description

We supply full set of turnkey project for production line brick making machine, including the complete line design, engineering management, civil engineering of kiln and drying chamber, the foundation building, supplying, installation of all the equipments, the supplying and installation of compressed air, water and power system and etc.

The main equipments on the brick producing line we can supply as bellow:

1. Raw Material Treatment Machine****-Box Feeder, Double Shaft Mixer, Crusher, Convey.

2.Brick Forming Machine*****-Double Stage Vacuum Extruder, Automatic Cutting Machine, Mixer and Extruding Machine

3. Drying System*******-Small Suction Tunnel Drying Chamber, Single Layer Dryer

4. Firing System********-Hoffman Kiln, Tunnel Kiln

5. Automatic Brick Loading and Unloading Machine, Robot Brick Loading Machine. Clay and Coal Material Prepare and Treatment

By the Bulldozer or Loader to send the raw clay to the box feeder, the box feeder adopted the valve controller, it can control the feeding quantity according to the requirements. Then, the raw clay through the belt conveyor go to double-roll crusher for crushing.

Coal will be crushed by the coal crusher and being piled up. Then by labor vehicle or loading machine send the coal to coal feeder, which adopt valve controller, can control the coal feeding quantity according to requirement. Through the belt conveyor, coal powder will go to normal rolling crusher, together with the clay crushing, coal powder and clay will be mixing completely.

The clay will receive second time mixing by fine pulverizing double roll grinder, in order to get the proper grain size. By water adding again and mix, extrude, cut up, so that to get a better molding quality. Brick Molding

The vacuum extruder will squeeze material to clean-surface and solid-inside columns, which will be cut into the required adobes by cutter.

Extruding machine is the key equipment among the whole production line, its performance are required as follows:

1) They can meet the need of different specification and hole shapes of the brick;

2) The vacuum degree and the extruding pressure could see the above table;

3) The hourly output per set is more than ***0pcs*****0pcs (standard bricks);

Moisture content when molding is controlled to *5%**8%; Full automatic clay brick making equipment and brick making machine ;

Different automatic brick dryer chamber ,Full automatic clay brick project gas fuel fired clay brick tunnel kiln;

Brief steps for making clay bricks

1. Brick raw materials should be prepared. Such as clay, fly ash, coal gangue, shale and so on.

2. Brick factory should be built. The yard of brick plant should be in agreement with the productivity of bricks. red clay bricks making machine

3. The size of bricks should be in agreement with the local standard.

4. The model of bricks should be choosed, solid brick or hollow brick, If is hollow brick, how many holes on the brick. red clay bricks making machine

5. The kiln for drying and firing bricks should be arranged, the tunnel kiln, annular kiln with dry hole or annular kiln. red clay bricks making machine

Company Information

Lingtong block making machine has been exported to Russia , India , Malaysia , Brazil , South Africa and the Middle East , and establised some overseas service center in this countries , has been receiving oders from over the world .

Lingtong Heavy Industry has built a "National Key Laboratory for New Wall Material Technology and Production Equipment", and was honored as a "Provincial Technology Innovation Enterprise", "Contract-honoring and Promise-keeping Enterprise" and "Enterprise of AAA Credit Rating". Lingtong brand is a "Shandong Famous Brand" and "Top Ten Famous Brand in China Brick Market", and was awarded the "Gold Award by China Construction Machinery Expo" and other special awards.

FAQ:

1. what's the raw material for producing bricks?

Answer: clay,mud,gangue,shale etc.

2. how much land area for building a new brick plant?

Answer: it need above *0,**0 square meters,the land area relate with capacity

3. when you need our proposal and quotation,what you have to mention in your inquiry.

Answer:please provide daily capacity,the brick size and you want to build a new brick plant or brick making machingery only. so we can give the proposal and offer accordingly.

4. what's the Trade terms?

Answer: it can be EXW,FOB,CIF,CNF,FCA,CPT, CIP

Our professional services:

(1) Our engineers are available to serve the machine overseas . Tell customer how to build a brick plant, the complete plant including three parts, brick shaping machinery, drying and firing.(Confirm clay,power electricity,water,land area, fund)

(2) Guide customers to choose the best and economic plant, recover the investment within short time.

(3) site inspection

(4) We are responsible for the offer, flow chart, and detail specification of each machinery.

(5) The warranty are 2 years.

→That's all,thank you!

→If you want to know more info, such as detail photos, shipping cost, working video etc. ,

Please kindly click the below "send" now!

↓

国家:	China
型号:	-
离岸价格:	12000 ~ 48000 / Set （面議）获取最新报价
位置:	-
最小订单价格:	12000 per Set
最小订单:	1 Set
包装细节:	standard see packages
交货时间:	20-30days
供应能力:	200 Set per Year
付款方式:	-
產品組 :	clay brick machine