详情
Features:
This product is specially developed
for the high-level external wall putty in order to apply the
high-level wall putty market, provides a flat base surface and
has strong adhesive force to the coating
1, strong cohesive force, can be
well attached to the wall and coating
2, good thixotropic, can obtain the
perfect almost smooth surface by simply disappearing, reduce
damage caused by paint due to the uneven surface
3, good anti-crack function
4, good damp-proof function and
ventilation can keep the wall and the painting dry
5, good flexibility, can resist the
damage of temperature, guarantee the long-term decoration effect
of the painting
6, texture of nature, ensure the
decorative paint effects can be completely reflected
Application:
1, the paint bottom ash for both
new and old walls
2, the paint bottom ash for old
base surface (paints, tiles, mosaics, stone and other smooth
surfaces)
3, more suitable for the imitation
aluminum, metal lacquer and other grass-roots putty
Operation Process:
1, the ratio: powder: water:
additive: 8: (2~2.8): 1(*5kg powder: 5kg water: 2.0kg
additive)
2, the substrate surface should be
firm, dry and clean, no grease, no wax, and other loose
materials.
3, if the wall is too dry, wet the
wall before operation till there is no obvious water on the
surface
4, pouring the water into the
stirring barrel, adding the powder slowly, stirring them into
particle paste with no powder no deposition, using inserting
tools to batch, after **6h of the first insert can make the
second time, polishing the lacquer putty layer, control the
thickness between 0.8~1.5mm
5, during the insert process, pay
attention to the even and flaws
6, when finishing the putty,
according to the weather to polish within 1~2 days
7, after 7 days of the inserting
putty, can paint other coatings, for the alkali resisting primer
the time can shorten
Technical Reference:
|
Shrinkage(%)≤0.5MPa
|
Compression and shear bond
strength≥1.5MPa
|
Waterproof pressure
strength≥1.2MPa
|
|
Tensile strength resistance
to temperature≥1.2MPa
|
Tensile strength resistance
to freezing and thawing≥1.0MPa
|
Resistance to artificial
aging strength(***0h)≥0.5MPa
|
Normal Amount:
Thickness under 1.5mm, about
1.8~2.5kg/m2
Cautions:
1, make sure the smooth and
vertical rate of the surface before operation
2, never mix the dry slurry with
water and use again
3, the mixed lacquer putty should
be used up within 3h
4, this product requiring operating
under 5℃~*0℃ situation, never operate under raining.
5, when finishing the lacquer putty
layer, finish the polishing within 7 days or it will be difficult
for later polishing, nursing for 2~3 days by watering can gain a
better effect for the layer hardness
6, for the uneven surface,
suggesting dealing it with base lacquer putty before the repair
lacquer putty
Store Method:
Store in cool and dry place,
unopened product can be saved for one year.
Packing:
*5kg powder + 2.0kg
additive/set
| 国家: |
China |
| 型号: |
Mebong MB-08
|
| 离岸价格: |
（面議）
获取最新报价
|
| 位置: |
Guangzhou |
| 最小订单价格: |
- |
| 最小订单: |
1 ton |
| 包装细节: |
- |
| 交货时间: |
5-10 days |
| 供应能力: |
500 tons/ month |
| 付款方式: |
- |
| 產品組 : |
Skim Coat (Wall Putty)
|
