medical masks

详情

Gold Monte's medical protective products certified with EU and FDA, are widely used in supermarkets, food processing plants, hotels, advanced beauty clubs, dust-free workshops, electronic assembly lines and famous restaurants. The unique design concepts applied to these products, completely subvert the traditional design concept, which are manufactured with new food-grade raw materials in strict accordance with the safety and health requirements. The advanced production technologies are implemented to ensure product safety, environmental protection and health gurantee, and approved by the state administration of quality supervision inspection center, these products are exported to many countries all over the world.
 1. Disposable N95 Medical Protective Mask

Anti-virus ability from high to low rank: 

KN95≈N95≈FFP2 mask (bacteria bfe>95%,pfe>95%) > this medical surgical mask (bfe b> 99%,pfe>99%) > general medical surgical mask (bfe>95%,pfe>30%)> disposable surgical mask (bfe>95%, no requirement for pfe)> ordinary civilian masks (bfe,pfe are not required). N95 wearing the best tightness, is so of the highest level of comprehensive protection).

Exclusively for the Japanese market, made by listed companies with quality strict identification. 

This mask test report results: BFE>99% (this indicator is for bacterial protection ability ), PFE>99% (this indicator is for virus protection ability ). The difference between the above two is the particle size, BFE is usually able to block 3 micron bacterial aerosol, PFE requires to be able to block 0.1 micron NACI aerosol. It white both Inside and outside, packed in 50 pcs per pack. 

 2. Disposable Medical Surgical Mask

The disposable medical surgical mask is composed of mask face and tension belt and the mask face is divided into three layers- the inner, the middle and the outer. The inner layer is of skin-friendly material, the middle layer is of isolation and filtration layer, and the outer layer is the special anti-bacteria layer.This highly efficient surgical mask has a strong hydrophobic permeability, and it has a significant filtering effect on the tiny aerosol with virus or harmful dust, but it cannot effectively filter PM10 and PM2.5. The overall filtering effect is good, and the materials used are non-toxic, harmless and comfortable to wear. It has the following characteristics:

1. Light, comfortable, tasteless, no fiberglass, no irritation to skin, waterproof;

2. Soft and comfortable adjustable nose clip;

3. Weared with small Respiratory Resistance in hygiene. The aerosol, dust, smoke, fog drops, toxic gases and toxic vapors, etc., will be absorbed by the filter material, so to be blocked from being inhaled.

This mask is made in line with YY 0469-2004 Technical Requirements for Surgical Masks, whose important technical indicators include filtration efficiency, bacterial filtration efficiency and respiratory resistance:

(1) filtration efficiency: in the condition of air flow at (30±2)L/min, the filtration efficiency of sodium chloride aerosol with the median diameter (0.24±0.06) μm in aerodynamics is not less than 30%;

(2) bacterial filtration efficiency: in the specified conditions, the filtration efficiency of staphylococcus aureus aerosol with the average particle diameter of (3±0.3) μm is not less than 95%;

(3) respiratory resistance: in the condition of filtration efficiency flow rate, the inspiratory resistance should not exceed 49Pa, and the expiratory resistance should not exceed 29.4pa.


3.  Disposable Ordinary Medical Mask

It is made In accordance with the relevant registered product standards (YZB), the filtration efficiency requirements for particles and bacteria are generally in absence, or the filtration efficiency requirements for particles and bacteria are lower than those formedical surgical masks and protective respirators.