PACKAGING
In plastic cartridges of **0 ml, **0ml, **0ml sausage,drum
package
COLOURS
White. Black or on request
PHYSICAL PROPERTIES
-
Primerless adhesion to most common substrates of the
building sector.
-
Elastic performance
-
Good weatherability
-
Low odor
-
Good tooling characteristics
-
Non-corrosive to metals
-
Suitable for alkaline substrates such as concrete,
mortar, fibrous concrete.
TECHNICAL PROPERTIES
1. Application
temperature
**0 to **0 oC
2. Extrusion rate at *3oC, *-mm nozzle,
9 ml/s
pressure 0,*3 N/mm2
3. Skin-forming time at *3oC/*0% rel. humidity :
*5' - *0'
4. Vulcanization rate at *3°C / *0% r.h.
:
1,0 mm/day
5. Hardness, SHORE
A:
*2±2
6. Temperature resistance :
**0 to ***0 oC
7. Joint movement capability
:
*0%
8. Adhesion and extension test according to DIN EN ****9 :
(The test results were taken from the laboratory
extensionmeter ASTMC *****1).
Substrate : Αluminium
|
σ**0
N/mm2
|
σmax
N/mm2
|
Εlongation at break
(%)
|
|
0,*2
|
0,5
|
**0
|
Accuracy : ± 5%
RESULT :Excellent Adhesion
APPLICATION FIELDS
***0 silicone is suitable for sealing and joining
constructions of glass, aluminium, tiles, ceramics, glazed
tiles, metals (zinc, copper, etc.), plastics (PVC, epoxides,
polyester, polyacrylate, formica, etc.), varnished or painted
wood, etc.
***0 IS ESPECIALLY SUITABLE FOR SEALING JOINTS ON POWDER
COATED ALUMINIUM FRAMES, ON THE EXTERNAL SIDE OF THE FRAME
BETWEEN THE ALUMINIUM AND THE MARBLE.
INSTRUCTIONS FOR USE
CARTRIDGES
The closed cartridge is cut at the point where the thread ends.
Then the nozzle is screwed on the cartridge and cut (slantwise
preferably) to form an opening proportional to the joint width.
After the cartridge has been cut appropriately, the sealant is
applied in the joint with the use of a hand- or air-gun.
The sealant must be applied on clean and dry surfaces (without
any dust, loose particles, oil, etc.).
The use of self-sticking paper tape (MASKING TAPE) on both
sides of the joint is recommended, in order to avoid soiling.
Immediately after the application of the sealing material in
the joint, the surface of the uncured sealant is smoothed with
the use of a spatula or by finger.
Restrictions :The width of the joint must be
neither less than **4 mm, nor more than ****0 mm.
Precautions : Contact with eyes must be
completely avoided. In such case wash with plenty of water.
Keep it away from children
Storage stability :at least *2 months if
stored in a cool (below *5oC) and dry place.
