联系人 Ms. Lynn
Room 1202,Jincheng Building,Wangchong Road, Shaoxing, Zhejiang
| SY*1 oil-displacing agent |
|
Nature：
Appearance: light yellow or yellow brown liquid
PH value: **8
Effective content: *0%
Surface tension:（0.**0.3%aqueous solution
mN/m）≦*0
Oil and water surface tension:（0.**0.3%aqueous solution
mN/m）***2 ~***3
Function features：
1. High temperature resisting, salinity resisiting low
pollution, low damage, easy to operate, flooding, strong
function and other characteristics.
2. Reduce the oil / water interfacial tension,
effectively reduce the oil / water interfacial tension
between ***2 to ***3 mN / m, the ultra-low state, thereby
greatly reducing or eliminating the formation capillary
action, reducing the stripping of crude oil needed to
stick attached to the power, to improve the efficiency of
the wash oil.
3. Closely related to the oil displacement efficiency and
rock wet ability change the wet ability of rock surface.
Oil-wet surface to lead to poor efficiency of the
flooding, wet surface allows the oil displacement
efficiency. This product can greatly increase the wetting
angle between crude oil and rock wet ability of the rock
surface can become strongly hydrophilic and wetting
reversal does not occur, is extremely beneficial to water
flooding.
4. Emulsification. This product has strong emulsifying
ability in the water-oil two-phase flow dynamic shear
conditions. The rock surface adhesion of crude oil
dispersion, stripping, and the formation of oil in water
(O/W) emulsion, and effectively improve the oil-water
two-phase mobility ratio and improve the drive for the
sweep efficiency of the solution, so as to achieve the
purpose of enhancing oil recovery.
Main feature:
1. Injected with water
2. Can greatly improve the efficiency of wash oil, is a
low-, high output additives
3. Suitable for all oilfield polymers flooding, suitable
polymer should not be injected into a small fault block
oil field.
4. Oil field recovery can be increased by *0% to *5%. 5.
Not ground manifold and equipment corrosion
6. Produced fluid non-toxic, no pollution to environment.
(Finished more than *8%)
Product introduction：
SY*1 the high-performance displacing agent
is developed for the improvement of secondary recovery
and EOR recovery special surfactants, efficient and
convenient way. Has excellent the applicability of
Permeability, low pressure, low-yielding, high-wax oil
field. Extend the oilfield period; the effect of flooding
is significant. Our company's current annual output is
tens of thousands of tons.
Mechanism of oil belt formation：
In the role of the goods, more and more oil droplets wash
out from the rock table, move the process forward,
colliding with each other, gathered merged into the oil
belt; oil belt and more oil beads convergence, gather
into a piece of oil column or oil walls. With the
continued displacement process, the oil column or oil
wall will flow to the well so as to achieve the purpose
of enhanced oil recovery.
Usage and dosage:
Single well: 0.3~0.5% of the product solution with water,
intermittent injection, the effectiveness of cycle: 3~4
month. Injection wells Group: continuous injection of 0.1
to 0.3% of the product solution with water, the
effectiveness of cycle: 7~*0 month (**0 to **0 days)
|
| 国家: | China |
| 型号: | SM008 |
| 离岸价格: | 1 ~ 3 / ( Negotiable ) 获取最新报价 |
| 位置: | - |
| 最小订单价格: | 1 |
| 最小订单: | 1000 Kilogram |
| 包装细节: | negotiation |
| 交货时间: | negotiation |
| 供应能力: | - |
| 付款方式: | Western Union, L/C, T/T |
| 產品組 : | Oil field additive auxiliary |
