paper-plastic compound bag making machine

详情

*8KW **0V FD**0 paper plastic fabric tube cement bag making machine

1.Descrition:
This machine can make the rolled paper-plastic compounded sheet into the tubular paper pipes, with functions of pressing, forming, gluing, cut-off, counting, etc.
It is suitable for cement, chemical, grain packing.

List of materials

Applications:

It is suitable for cement, chemical, grain packing

Specifications:

1)Bag length: unlimited
2) Bag width: ******0mm
3) Output: ****0pcs/min
4) Fabric roll width: *******0mm
5) Total weight: ***0 kg
6) Total Power: *8Kw

User Manual:

1.Design parameter for control cabinet andlist of main materials

1.1  Design parameter

1.1.1Control cabinet power supply:**0V/*0HZ, 3 phase 5 wire

1.1.2 Power: *0 KW

1.1.3Control cabinet has a good grounding for static removing

1.1.4Materials: Carbon steel, outside power coating

1.1.5Color: computer color

1.1.6Cable into the line:inlet then out

1.1.7 Protection Level:IP3X

1.1.8Installation occasions: User MCC distribution room or at the scene

2.operation introduction

2.1  Control Panel【Control Panel】

【power indication】: Indicator light, the lights on meanthe Control cabinet have the electricity

【power switch】: General power switch, screw the , the system have the electricity

【system starting】: System running , press the , the machine starts working

【system stop】System stop , press the , the machine stop working

【frequency control】when the system is working, screw the can change the  speed of bag making

【wheel cutter switch 】wheel cutter on/off

【color-marking switch】wheel cutter color-marking on/off

【emergency stop】system emergency stop , press the , the system will don’t have electricity

1.Operation steps

3.1 Power connection for the control cabinet, turn the “power on”and then the system has electricity.

3.2 press the “system starting”on the control cabinet and the then system will start

3.3 Setting the bag length

Servo drive Operational Interface

press【PAR/ALM】, it will show F**0, and then press the key“up down”to F**5

press【RD/WT】, it will show the primary bag length, (unit: cm ), you can press the key“up down”to adjust the bag length

press 【RD/WT】to confirm the size of the bag, press the 【PAR/ALM】two times, and then press 【STOP/RESET】, the screen will show 0.By now , setting the bag length has finished

3.4 Starting the “wheel cutter” switch on the control cabinet

3.5 To choose whether start the color tracking function or not

3.6 Turn the frequency speed control , the machine will be running, accelerate to the required speed slowly.

3.7 Press the “emergency stop” in the case of an emergency

in order to cut off system power quickly.

3.8 Please press the 【system stop】when you want to stop the system.

4. Attentions

4.1Please disconnect all of the circuit breaker when the system doesn’t use for a long time.

4.2 Keep machine intact till our engineer finish installation

4.3 If not knowing the meaning of the parameters, please do not adjust all the parameters of frequency converter and wheel cutter drivers in the control cabinet, in case of any problems , please call us for advice

4.4Please periodically check the wiring screw in the control cabinet whether is loose, the connection wire connects bag making machine and control cabinet whether is broken.

4.5Control cabinet are **0V power of strong electricity, when the system is running , please close the cabinet doors to avoid danger.

Remark: Our company maintain the final right of interpretation.

5. Supporting machine

Model:SQFD-Ⅱ                

Thermal rating:1.5kw       

Press capacity:********0pcs/h         

Earnest power:1.5kw        

Insalls The size:***0Ｘ***0Ｘ***0mm           

Gross weight (approximately) :**0kg 

The machine adopts frequency control, smart temperature control, high-speed sewing configuration, mainly for chemical bags, finished tube of the cement bag, suture the bottom and then heat sealing the package edge; it is idea equipment for back over.

 Sample Bags: