详情
REPRAPPER PC Filament
REPRAPPER PC 3.0&1.*5mm 3D printing filament is one of
the best, most consistent and most tested Flex filament that
compatible with MakerBot 3D printer, UP 3D printer, Afinia 3D
printer, solidoodle 3D printer.
Specification:
Material: PC
Color: nature/white/yellow/green/red/blue/black
Diameter: 3.0&1.*5mm
Tolerance: +/*0.*4mm
Printing temperature: **0~**0º C
Net weight: 1kg
Package: Vacuum sealed, individual box
Why PC?
Impact resistance
heat resisrance
Good dimensional stability
Applicability:
RepRapper Flex 3D printing filament compatible with MakerBot 3D
printer, UP 3D printer, Afinia 3D printer, Solidoodle 3D printer
etc who without lock key of their filament with 3.0mm
diameter.
Why us?
1) Top 3D printer supplier's top choice.
2) Most innovation on 3D printer field over the
world.
3) Not only tight quality control on products itself, the more
important is the systematic quality control on the whole supply
chain.
4) Fast delivery. Ship out products within 5 days for all color
and material if less than ***0 kg.
5) Spool can be customization but need longer
time.
6) Accept OEM/ODM over the world for large
order.
Tips:
How to get a perfect printing model?
In fact if you want to get a perfect printing model, you need a
reliable printer with the 3D printer at right temperature under
right parameter setting. It means that your printer should under
good condition; Your filament should be good enough too. The
following tips are based on this question.
Tip 1: What is your idea printing temperature?
In fact different printer series and different printer sensor has
different temperature tolerance.
Regardless sensor difference, the printing temperature of
REPRAPPER filaments are as follows.
* ABS filament is **0~**0° C, the idea temperature is **0°
C.
* PLA filament is **0~**0° C, the idea temperature is **0°
C.
* HIPS filament is **0~**0° C, the idea temperature is **0°
C.
* Nylon filament is **0~**0° C, the idea temperature is **0°
C.
Different color has little variance.
For UP and Afinia printer, you can use it directly under ABS or
PLA mode (Depends on what material you bought). For Makerbot,
solidoodle etc printer that allows you change the temperature,
you can set a temperature (e. G. **0° C), then extrude the
filament manually before printing. If you saw the filament can be
extruded out smoothly without bubble, it means that temperature
is ideal
Setting.
Tip 2: How to avoid printing parts tilt?
It is very important for the first layer. You want to get a
successful printing model you need to assure the platform is
leverage. If the platform is not leverage the probability of tilt
will increase. Before you begin your job you need to confirm the
nozzle to all platform distance is the same.
For big parts, it is important to pre heat the platform for ABS
and HIPS.
The filament can be stick on ABS board/ Perf board/3M blue
tape/Kapton tape etc.
When you printing, the closer between nozzle to platform the
better but should not break the platform.
Tip 3: How to avoid printing failure?
Before you begin your job, you need to confirm:
1) The filament is good, no clog and with consistence diameter.
Wired well.
2) The filament feed system can feed the filament smoothly to
avoid lack of filament in the extruder during
printing.
During printing you need to confirm:
1) The temperature is ideal and the extruded filament at nozzle
is smoothly without bubble.
2) The first layer is OK as mentioned above.
Now starting your 3D printing journey!
REPRAPPER,
Beyond Imagination through Innovation!
| 国家: |
China |
| 型号: |
RE-PC-1.0
|
| 离岸价格: |
( Negotiable ) （面議）
获取最新报价
|
| 位置: |
- |
| 最小订单价格: |
- |
| 最小订单: |
5 Piece |
| 包装细节: |
Vacuum Package with Desiccant |
| 交货时间: |
5 days |
| 供应能力: |
10000 Kilogram per Month |
| 付款方式: |
- |
| 產品組 : |
3D printing filament
|
