PU Open End Timing Belts

详情

Anxin open lend timing belts are manufactured in thermoplastic polyurethane, that gives superior wear and abrasion resistance. Various grades of steel cords or kevlar cords offer good running characteristics, even with high tractive loads.
Manufactured to tight tolerances, reliability and excellent dimensional stability. The addition of a Nylon coating on the tooth and/or the back of the belt during production, enhances the running properties for specific applications. An extra thickness of polyurethane is also possible on the back of the belt, offering extra protection against aggressive or heavy products.
 
TYPE:
MXL  XL  L  H  XH T2.5  T5  T*0  T*0  AT5  AT*0  AT*0  3M  5M  8M  *4M  *0M  S3M  S5M  S8M  S*4M  RPP3M  RPP5M  RPP8M  RPP*4M P1  P2  P3  P4  TT5
 
Anxin can supply PU open end timing belts and jointed belts.

PU open end timing belts
These are manufactured as continuous lengths, with the reinforcement in a parallel configuration. Standard roll lengths are *0 or **0 metres. Other lengths available on request.

Anxin PU open end timing belts as an open length are normally used in linear motion drives.

Jointed belts
By jointing using the thermoplastic properties of the open end belt, jointed belts can be produced to any length by welding. The finished joint is resistant to fatigue from flexing and tension, due to the unique symmetrcal Vee shaped pattern of the joint.

Jointed belts are suitable for conveying applications, particularly when indexing and/or positive drive is required.Supplementary application of flights, profiles and coatings is possible, to suit specific applications.

We have steel cords and kevlar cords for your choice.