Q Series Current Moudel Mitsubishi Q64PN Moudel

详情

Detail of Goods :The basic conversion moudel of Q series and the additional basic installation connection adapter unit of a series. Applicable to: a*-b / a*-b. MES interface module. MX mesinterface software and CF card are required. Easily connect production equipment and information systems.
Through excellent database sharing function, the cost of informatization is greatly reduced
In the way of direct connection, the connection process with enterprise system database (such as MES) is simplified. Module deployment is simple without any programming q*4pn
The data can be monitored on the module side. In case of user-defined trigger conditions, the specified data will be read in the form of SQL text and sent to MES.
Compared with the previous scheme of acquiring / monitoring data through gateway PC, it can reduce the network load, receive information from MES and execute the SQL task of pre customer storage. In addition, it also receives production instructions from MES.
Download the production information from the database and modify the formula information conveniently. Base plate module installation position: QS series power module installation slot.
Applicable substrate module: qs**4b Input power supply: AC**0 ~ **0V
Safety PLC (safety programmable system) refers to a programmable system that can still respond accurately and cut off the output in time in case of failure of itself or peripheral components or actuators.
Different from ordinary PLC, safety PLC can not only provide the function of ordinary PLC, but also realize the function of safety control,
Meet the requirements of EN ISO ******1, IEC ****8 and other standards for safety related components of control system. The mainstream safety PLCs in the market include PSS ***0pss ***0 of PiZ, among which PSS ***0 can handle standard control procedures in addition to safety procedures. All components in the safety PLC adopt a redundant and diverse structure, and the two processors conduct cross detection when processing,
The processing results of each processor are stored in its own memory and will be output only when the processing results are completely consistent
If any inconsistency occurs during processing, the system will be shut down immediately. Input points: *2 external servo signals, 8 axes. Input mode: source type / drain type.
Input and output occupied points: *2 points. It is convenient to process large capacity data.
In the past, it was impossible to realize the continuous access of standard ram and SRAM card file memory area. The boundary of each region needs to be considered when programming.
8MB SRAM expansion card is installed in the high-speed general-purpose qcpu, which can take the standard RAM as a continuous file register with a capacity of up to ***6k words, thus simplifying programming. Therefore, even if the soft element memory space is insufficient,
You can also easily expand the exhibition file storage area by installing an extended SRAM card.
The index register is extended to *2 bits, so that the programming can also go beyond the traditional *2K words, and the index modification is extended to all areas of the file register.
In addition, the processing speed of index modification plays an important role in the efficient operation of structured data (array), which has been improved.
When indexing modification is used in repeated processing programs (such as instructions from for to next, etc.), the scanning time can be shortened
Specification of Mitsubishi q series power module q*4pn
[installation position] it is installed in the slot of the power module
[applicable substrate] Q3 □ B, Q3 □ dB, Q6 □ B
[ power] AC**0 ~ **0V (- *5% ~ + *0%)
[ frequency] *0 / *0Hz ± 5%
[ voltage distortion factor] within 5%
[maximum apparent power] **0va
[starting current] within *0a and 8ms
[rated output current (DC5V)] 8.5a
[overcurrent protection (DC5V)] above 9.9A
[overvoltage protection (DC5V)] 5.5 ~ 6.5V
[efficiency] more than *0%
[allowable instantaneous power failure time] within *0ms
[operation indication] LED indication (on when 5VDC output)
[fuse] built in (user cannot change)
[contact output section]
. application: err contact (the contact changes to off when the CPU stops in error)
. rated switching voltage / current: *4VDC 0.5A
. minimum switching load: 5VDC 1mA
. response time
Off - > on below *0ms
On - > off under *2ms
. service life
Machinery: more than *0 million times
Electrical: rated switching voltage / current, *****0 times or more
. surge suppressor: None
. fuse: None
[external wiring mode] screw terminal block (M3.5 screw)
[applicable wire diameter] 0.3 ~ 2mm Square
[applicable to clamping terminal] RAV1 *5~3.5,RAV2~3.5
[applicable tightening torque] *9 ~ *8N? cm
[overall dimension h * w * D] *8 * *5.2 * **5mm
[weight] 0.*7kg