联系人 Eadbert
undefined
Primary advantages
- Small and compact readhead (*2—*2—*0.6mm).
- Single field scanning, low subdivision error.
- The magnetic zero point can be set arbitrarily, which is flexible and convenient.
- Ultra-light 7g readhead, ultra-flexible 3.4mm diameter cable, small inertia, does not affect system performance.
- Automatic gain control to ensure effective signal strength and long-term reliability.
- The reading head has 2 indicator lights visible in two directions, which is convenient for observing the signal status.
- Read head with optical coating, high signal-to-noise ratio.
- The surface of the scale is hard without coating and has strong scratch resistance.
- Scale with a thickness of 0.1mm has the same expansion coefficient as the substrate.
- *0¼m small grid pitch, better running effect than magnetic grid, low noise and stable speed.
- Maximum speed 4.5m/s.
- *0¼m/m scale absolute accuracy
Readhead specification
| Dimensions: | L *2mm — W *2mm — H *0.6mm |
| Grating sensor: | *0¼m |
| Weight: | Reading head 7.1g,Cable *8g/m |
| Power supply: | 5V±*0% **0mA, A, B, Z signal with **0ohm load |
| Output signal: | differential TTL, origin signal (optional) |
| Connector: | D-sub *5 Pin Male,D-sub 9 Pin Male |
| Resolution: | 1¼m, 0.5¼m |
| Electronic subdivision error: | |
| Maximum speed: | 4.5m/s |
| Reference origin (optional): | Magnetic sensor on the side of the readhead |
| Maximum speed: | 2.5m/s,Related to resolution and counter minimum clock frequency |
| Reference origin (optional): | Magnetic sensor on the side of the readhead |
| Reference origin unidirectional repeatability: | 1LSB (‰¤*0mm/s) |
| Reference origin unidirectional repeatability: | 1.5 microns in one direction |
Scale specification
| Dimensions: | W 6mm — H 0.1mm |
| Adhesive thickness: | W 5mm — H 0.1mm |
| Grid pitch: | *0¼m |
| Accuracy grade: | ±*0¼m (L4 scale) |
Cable parameters
| Cable outer diameter: | 3.4mm±0.2mm |
| Bending times: | *0 million times, the bending radius is greater than *5mm |
Environmental parameters
| Storage temperature: | **0°C to *0°C |
| Operating temperature: | 0°C to *0°C |
| Vibration level: | *5Hz to ***0Hz max. **0m/s² 3 axes |
| Protection class: | IP*0 |
SE*0 Reading head installation precautions
1. Scale placement tools must be used for scale placement, and
freehand placement is prohibited.
2. Because there may be mounting stress, it takes *4 hours after
the scale is mounted before the accuracy calibration can be
performed, and it takes longer when the temperature is low.
3. For the long-term reliability of the application, the main
body of the application (linear motor, machine) needs to be
reliably grounded and shielded to prevent the reading head from
being disturbed, and the power line and signal line should be
kept as close as possible. Volume separation arrangement.
4. The power supply terminal of the reading head needs to meet
5V±*0%, and the current is not less than **0mA.
5. Dirt on the scale may lead to increased output signal noise or
position failure. Therefore, the scale must be kept clean. The
scale can be cleaned with dust-free paper and ethanol or
isopropanol.
6. The fixing screw of the reading head must be in accordance
with the length and torque given in the installation diagram,
otherwise the reading head may be damaged or poorly fixed.
| 国家: | China |
| 型号: | SE40 |
| 离岸价格: | 120 ~ 380 / Piece 获取最新报价 |
| 位置: | Dongguan,Guangdong,China |
| 最小订单价格: | 120 per Piece |
| 最小订单: | 1 Piece |
| 包装细节: | - |
| 交货时间: | - |
| 供应能力: | - |
| 付款方式: | Other |
| 產品組 : | - |
