Sunseason split pressurized solar water heater

详情

Features for split solar water heater:

1, collectors separates from the storage tank, the tank can be installed anywhere inside the house.

2, the collector can be put on the inclined roof or flat place.

3, module design, arbitrary combination, harmonious with the building perfectly

4, intelligent control and automatic operation

5, anti-freezing: No water inside the tubes when it works.

6, the system controller has the anti-freezing function that the temperature circulation will operate while it reaches the fixed temperature.

7, multifunction: bathing, washing, domestic heating

8, workable at anytime and enjoyable.

Working principle:

1, when the temperature of the heat collector reaches the set value, the controller shall start the circulation pump automatically

2, the circulation pump makes heat-conducting liquid circulate automatically.

3, the heat-conducting liquid transfers heat to water by heat exchanger in the water tank.

4, in case the temperature of the water tank does not reach to max, then start the auxiliary heating device.

5, in case the temperature of the circulation pump does not reach the set value, the circulation pump shall be shut down automatically.
Technical Specifications for split solar water heater: Outer water tank: color galvanized steel or stainless steel with 0.5mm thickness Inner water tank: food grade SUS**4/2B stainless steel with 0.5mm thickness Layer for heat preservation: high density  polyurethane of *0 to *0 mm thickness Bracket: color galvanized steel or stainless steel with 1.5mm thickness Type of vacuum tube: Borosilicate glass 3.3, red copper heat pipe Material of tube coating: AL-N-AL or Cu-S/S-AL/N absorb coating Hail resistance:  *5mm   Cold resistance: **0°C Absorb rate: ≥*3%   Thermal radiation rate: ≤6% //